Workplace Safety is a broad term that covers many different safety products and equipment. The number one priority of workplace safety is keeping workers, visitors and customers safe at work, and also includes protecting expensive machinery, equipment, structures, and vehicles. SafetyFind’s massive range of workplace safety products includes separation products that allow pedestrians and vehicles to safely coexist, asset protection equipment such as machinery guarding, security bollards and expandable barriers, and queue management, people separation and social distancing through retractable belt barriers, portable fencing and clearly displayed safety signage.

Showing 1–24 of 114 results

Show sidebar

Dock Board 1525 x 1525mm – Aluminium

$2,400.20 inc. GST

Dock Boards serve a similar purpose to dock plates but are designed to cope with heavier machinery like forklifts. They consist of a plate deck with steel curbs on both sides to prevent run-offs and provide additional strength and stability. Dock boards can be quite heavy and therefore, include carry chains so they can be transported by the forklift. Alternative dock plates and boards in a range of sizes and load ratings are available on request.

Shock Absorbing Bollards

$529.10$2,028.40 inc. GST
The Shock Absorbing Bollard (SAB) has the ability to shift sideways if hit at or near ground level. If the impact is higher up the bollard, it can tilt up to 8 degrees, at which point it locks offering maximum protection. Alternatively, if the contact is of a deflection or glance nature, the SAB is able to rotate through a full 360 degrees. SABs are designed to be used anywhere vehicles are maneuvering at low speeds, such as carparks and warehouses. The self centering design means the SABs can take repeated impacts without incurring permanent damage. They simply absorb the impact and return to their original position. These unique characteristics result from the combination of clever engineering and the use of high tech composite materials.

Rubber Speed Cushion

$320.10$1,927.20 inc. GST

Rubber Speed Cushions are made from recycled rubber. Rubber is lighter & easier to work with than asphalt & concrete, significantly reducing installation time.

Rubber pieces can pulled up & moved without being destroyed. This is convenient for municipalities who want to insttute temporary measures to test an area or permanently control traffic speed. Long lasting & cost-efficient, sold as a kit or individual sections if a section is damaged & needs replacing, supplied complete with fixings.

Dock Plate 1220 x 1220mm – Aluminium

$1,411.30 inc. GST

A common problem on loading docks is bridging the gap between a truck and the dock or warehouse floor. Not all trucks are the same height, and the height of the trailer floor within a truck can vary according to how heavily the truck is laden. Thus, there is not only a gap to bridge, but a height difference to overcome. Dock plates are used for lighter loads such as hand trolleys, pallet jacks or foot traffic.

They must NEVER be used with powered equipment such as forklifts.

Expanding Barrier Freestanding Maxi

$37.40$1,916.20 inc. GST
Maxi, with a standard opening of 6.7 or 7.8 meters, the Maxi takes our expandable guards range to a new level of versatility. A combination of aluminium slats, galvanised steel slide components & stainless steel fixings means the Maxi is suited to both indoor & outdoor applications, complete with locking castors.

One-Way Access Spikes

$303.60$1,084.60 inc. GST

The Blade Runner one way access control consist of either a 1,000mm or 500mm heavy duty steel modules & steel end caps.

Each module has independently retracting teeth, when a vehicle approaches from the correct direction the teeth simply retract allowing the vehicle to pass freely, when approached from an unauthorised direction the teeth lock up denying access and risking almost certain tyre damage.

Key features of the one way access spikes include high visibility lime green powder coat finish and an ultra low profile construction to ensure adequate vehicle clearance. The one way access control system has been designed to provide a soft approach for vehicles due to its low ramp angle and reduced height. These same features also eliminate much of the noise commonly associated with older style products.

Six fixing points per metre (4 per 500mm module), heavy steel construction, steel end caps and revolutionary new spring design ensure a long service life with low maintenance.

WARNING: - Always check with your local authority or controlling body to ensure one way access spikes are allowable in your situation (this is the end users responsibility). One way access spikes MUST always be installed with an awareness sign kit. One way access spikes should always be placed clear of intersections and curved roadways. Failure to heed these warnings will void all warranties.

Bike Rack Schoolies

$875.60 inc. GST
8 Bike - Galvanised

Foam-Filled Column Cushion

$451.00$1,133.00 inc. GST

Column Cushion, also known as a Column Protector, helps prevent damage to structural columns by surrounding them with a foam-filled polyethylene cushion. Available in a range of standard sizes that fit most square or round columns, the two blow-moulded hard shells can be installed in seconds without the need for any tools, and removed at any time for cleaning or maintenance.

Unlike most moulded column protectors which simply contain air, Column Cushion is filled with injectable expanding foam. This foam dramatically increases impact protection and helps the Column Cushion return to shape after impact. So while other column protectors may look similar, ONLY Column Cushion by Barrier Group has the added advantage of foam fill.

Product Features:

  • a foam-filled polyethylene cushion.
  • Moulded from high impact polyethylene in bright Yellow with contrasting Black straps.
  • Can be used singularly or stacked in pairs.
  • U.V. stabilised for indoor or outdoor use.
  • Surprisingly cost-effective and maintenance free.
  • Extremely versatile and durable.
  • Chemical resistant, non-conductive and waterproof.

Removable Bollards In-ground Cam-Lok

$81.40$1,075.80 inc. GST
Cam-Lok removable bollards are available in premium or economy models, freestanding and roller door Cam-Lok. They are designed to protect businesses from costly ram raid robberies or damage. The bollard is locked deep into an in-ground sleeve, with internal locking mechanism secured by a high quality cam lock.

Retractable Bollard

$412.50$1,057.10 inc. GST
Retractable bollards are designed for medium security applications such as traffic & parking control, they offer a simple trouble free operation, proven over many years of installation. The retractable bollard is available with a choice of two different materials mild steel or 316 grade stainless steel both supplied with mild steel hot dipped galvanised in-ground casing. The retractable bollard has only two moving parts providing trouble free operation & is supplied with 2 x unique low cost "T" handles.

Height Bar

$66.00$877.80 inc. GST

Suspended height restriction bar with hanger assemblies and chains

Minimise the risk of damaging vehicles and property caused by oversize vehicles entering areas of restricted height by installing suspended Height Bars.

Height bars are available in a range of standard lengths from 2 metres all the way up to 6 metres. Each height bar is supplied with the necessary chain suspension kits and “LOW CLEARANCE” text, with your specified height in Black lettering on a White vinyl background.

Use height bars at locations where vehicles first enter an undercover area or encounter an overhead obstruction, where the clearance in either case is: (i) 3 metres or less if only cars or light vans are likely to use the facility or (ii) 4.6 metres or less in all other areas.

Heavy Duty Steel Round Bollards

$177.10$869.00 inc. GST

Heavy duty steel bollards with wall thickness ranging from 5 tp 6.4mm for tough environments. All our steel bollards come hot dip galvanised and are available with or without powder coated surface finishes.

Cast aluminium caps and reflective bands are included while optional chain ring kits are available to purchase separately.

  • Also the perfect bollard at home to protect expensive power banks and EV charging stations

Stainless Steel Convex Mirrors

$413.60$820.60 inc. GST

Stainless steel safety mirrors are extremely durable over long term installations and are designed for outdoor use in areas that are known for vandalism or high weather conditions such as airports, railway stations, prisons and public places. Post mount brackets and fixings are supplied for easy installation to walls or posts.

Aluminium Trolley Ramp 900 x 1025mm

$625.90 inc. GST

The ATR900 is a robust trolley ramp manufactured from 6mm thick aluminium textured floor plate with a total weight of approximately 15kgs. It is designed for pedestrian or hand trolley use with a load limit of 300kgs. With the ability to bridge changes in height up to 200mm, it is ideal around loading docks. Supplied with two stainless steel locating pins that secure the ramp in place, and convenient built-in carry handles to facilitate handling by one person.

They must NEVER be used with powered equipment such as forklifts.

Heavy Duty Bump Rail

$822.80 inc. GST

Bump rail is high strength aluminium extrusion that weighs less than half the equivalent steel profile per lineal metre.

When faced with the curved side to an impact Bump Rail is designed for use as a truck or machinery stop, the rounded top & curved face offering a higher contact point for the vehicle wheels.

At 2,400mm long it is the right width for most trucks, fixing points at either end have been strategically positioned at the point of impact 275mm apart to ensure maximum hold down. Also available is a galvanised steel slip joiner for joining rails together if required.

Supplied pre-drilled & powder coated Yellow.

Holding Rails, Target Boards and Access Bollards

$187.00$788.70 inc. GST

Holding Rails & Target Boards

Designed for use at pedestrian and cyclist crossings to allow the user to hold on to or rest against while waiting for traffic conditions to change. They are hot dip galvanised prior to being finished with a Yellow powder coat. They come complete with Class 1 Red/White reflective bands. Holding rails are available in two designs, rail only or rail with target board. Target boards are used where a holding rail is mounted at right angles to a path. In-ground sleeves with gibb keys are available in either core drilled or new concrete models.

Access Bollards

The prevention of illegal vehicle access is critical to avoiding damage to the pathways and lightweight bridge structures, particularly when they have been designed only for bicycle and pedestrian use. The bollards are all 140mm in diameter and 1050mm tall in either surface mount, below ground or removable designs with locking sleeves. They are hot dip galvanised, prior to being finished with a Yellow powder coat, and come complete with Class 1Red/White reflective bands.

Bicycle Path Bollards & Rails

$247.50$788.70 inc. GST
The bicycle path access bollards prevent illegal vehicle access & are critical to avoiding damage to pathways & lightweight bridge structures, particularly when they have been designed only for bicycle and pedestrian use, whilst the bicycle holding rails are designed for use at pedestrian & cyclist crossings to allow the user to hold on to or rest against while waiting for traffic conditions to change.  

Mobile Expanding Safety Barrier

$561.00 inc. GST

Our mobile expanding safety barrier is great for a wide range of indoor and outside temporary barricading scenarios. The versatile design may be placed to create a distinctly visible straight, curved or round barricade.

The unit weighs 18.4kg, sits a metre high and extends completely to 4 metres. It comes complete with caster wheels and locking straps to make sure it is easy to relocate.

Traffic Cone – 1000mm Reflective – Yellow – Value Pack of 10

$504.90 inc. GST

Traffic Cone - 1000mm Reflective - Yellow - Value Pack of 10

Cam-Lok Removable Bollards – Surface Mount

$143.00$618.20 inc. GST

Surface mount removable bollards are ideal for installation where core drilling or slab penetration is not permitted. Cam-lok bollards are designed with a high quality 'bi-lock' removable core lock mechanism that is supplied with two security registered keys per bollard order.

Expanding Barrier Utility Freestanding

$14.30$629.20 inc. GST
  • Three sides that expand out to 2.6 metres
  • Width when closed 360mm
  • Steps up to 300mm for changing floor levels
  • Designed for cordoning off small spaces
  • Wall receiver and sign brackets included
  • 990mm high, 1090mm high when used with optional castors

Event Fence Crowd Control Barrier

$207.90$534.60 inc. GST
Event Fence portable barrier is a system of interlocking free standing fence panels. Strength, durability and flexibility are all features of Event Fence. Simply link Event Fence panels together to create continuous barricading for festivals, parades, sporting events or work sites. Optional forklift stillage makes storage and transporting of Event fence panels simple and efficient.

Pilot Telescopic Multi Post

$177.10$475.20 inc. GST

Whatever you want it to be! The telescopic post is mounted to a mobile 20kg cast iron base that can extend 700mm from 1300mm to 2000mm or be locked anywhere between. Compatible with all Pilot accessories, Multi-Post can be configured in numerous ways using the included accessory mountings.

In outdoor or windy conditions the stability of Multi-Post can be increased through the addition of optional 10kg base weights Up to two base weights at 10kgs each can be added bringing the total weight of the Multi-Post base to 40kgs. The weights can be added or removed at anytime without the need for tools.

Truck Wheel Stop

$371.80$569.80 inc. GST

Designed to withstand the weight of heavy vehicles and machinery when driving into parking bays. Manufactured from 5mm heavy wall steel tube and hot dip galvanised. Recommended for installation into concrete surfaces only. Fixings included.