Cone Bar Retractable
The retractable cone bar is manufactured from ABS plastic with alternating black and yellow stripes. It is designed to extend and retract to join traffic cones together to create temporary barricading applications.
Corner Protector
Corner protectors are manufactured from moulded and recycled rubber and finished with black and yellow stripes. They are the ideal solution to protect assets and vehicles from impact damage in car parks, parking complexes and any industrial building. Suitable for absorbing impacts from vehicles and forklifts.
Directional Tactile Bar
Raised flat-top tactile bars are used to assist visually impaired individuals of the direction in which the path travels. While used for directional assistance for pedestrian travel, they also provide guidance around obstacles like street furniture in high foot traffic areas.
Dock Board 1525 x 1525mm – Aluminium
Dock Boards serve a similar purpose to dock plates but are designed to cope with heavier machinery like forklifts. They consist of a plate deck with steel curbs on both sides to prevent run-offs and provide additional strength and stability. Dock boards can be quite heavy and therefore, include carry chains so they can be transported by the forklift. Alternative dock plates and boards in a range of sizes and load ratings are available on request.
Dock Plate 1220 x 1220mm – Aluminium
A common problem on loading docks is bridging the gap between a truck and the dock or warehouse floor. Not all trucks are the same height, and the height of the trailer floor within a truck can vary according to how heavily the truck is laden. Thus, there is not only a gap to bridge, but a height difference to overcome. Dock plates are used for lighter loads such as hand trolleys, pallet jacks or foot traffic.
Dock-Safe-Q
Dock-Safe-Q is a lightweight rapid deployment temporary safety barrier system to prevent people tripping or falling from elevated loading docks.
Dock-Safe-Q is comprised of two parts (ordered separately) which can be used in conjunction or separately.
- The Dock-Safe receiver is a moulded rubber block that is mounted directly to the face of the loading dock (fixings supplied), this receiver can act as a dock bumper only or as dock bumper & panel holder.
- The Dock-Safe-Q-panel simply drops into sockets in the receiver, or panels can be used without receiver by core drilling a 50mm diametre hole into the floor to receive the panel posts.
Panels manufactured from blow moulded polyethylene, 2,130mm long x 900mm high, receivers are moulded rubber.
Dome Convex Mirrors
Dome convex safety mirrors are an economical alternative to other expensive models on the market and come in models that provide 90 degree, 180 degree and 360 degree views. They are widely used in convenience stores, milkbars and shops.
- Recommended for indoor use only.
Downpipe Protectors
These bull dog Downpipe Protectors have been designed to guard cables and exposed pipes from the risk of damage caused by maneuvering forklifts and vehicle impacts. Pipe guards defend your vehicle or forklift as well as your downpipes, without intruding on available car parking space. Manufactured from mild steel, the guards are hot dipped galvanised & powder coated Yellow for high visibility & include 6 x pre-drilled mount holes 10mm diameter. Available to suit 100mm or 200mm pipes or cables.
Drop Over Cable-Protector
Drop-over cable protectors are manufactured from moulded polyethylene and features a one channel design with interlocking ends to create continuous cable or hose protection. They protect cables from damage caused by constant foot traffic and prevent fall accidents due to tripping. They are ideal for dropping over floor cables and hoses in the office, at events, in stores or during renovation and construction works.
Event Fence Crowd Control Barrier
Fibre Glass Stair Nosing
FRP stair nosing is manufactured from safety yellow fibreglass reinforced composite plastic that features a tough anti slip grit. Ideal for public spaces and workplaces to eliminate the risk of slip accidents. Suitable for jetties, piers, ferries, factories, warehouses, train stations and public stairways.
Foam-Filled Column Cushion
Column Cushion, also known as a Column Protector, helps prevent damage to structural columns by surrounding them with a foam-filled polyethylene cushion. Available in a range of standard sizes that fit most square or round columns, the two blow-moulded hard shells can be installed in seconds without the need for any tools, and removed at any time for cleaning or maintenance.
Unlike most moulded column protectors which simply contain air, Column Cushion is filled with injectable expanding foam. This foam dramatically increases impact protection and helps the Column Cushion return to shape after impact. So while other column protectors may look similar, ONLY Column Cushion by Barrier Group has the added advantage of foam fill.
Product Features:
- a foam-filled polyethylene cushion.
- Moulded from high impact polyethylene in bright Yellow with contrasting Black straps.
- Can be used singularly or stacked in pairs.
- U.V. stabilised for indoor or outdoor use.
- Surprisingly cost-effective and maintenance free.
- Extremely versatile and durable.
- Chemical resistant, non-conductive and waterproof.
Galvanised Bike Rail – Below Ground 400mm
Heavy Duty Bump Rail
Bump rail is high strength aluminium extrusion that weighs less than half the equivalent steel profile per lineal metre.
When faced with the curved side to an impact Bump Rail is designed for use as a truck or machinery stop, the rounded top & curved face offering a higher contact point for the vehicle wheels.
At 2,400mm long it is the right width for most trucks, fixing points at either end have been strategically positioned at the point of impact 275mm apart to ensure maximum hold down. Also available is a galvanised steel slip joiner for joining rails together if required.
Supplied pre-drilled & powder coated Yellow.
Height Bar
Suspended height restriction bar with hanger assemblies and chains
Minimise the risk of damaging vehicles and property caused by oversize vehicles entering areas of restricted height by installing suspended Height Bars.
Height bars are available in a range of standard lengths from 2 metres all the way up to 6 metres. Each height bar is supplied with the necessary chain suspension kits and “LOW CLEARANCE” text, with your specified height in Black lettering on a White vinyl background.
Use height bars at locations where vehicles first enter an undercover area or encounter an overhead obstruction, where the clearance in either case is: (i) 3 metres or less if only cars or light vans are likely to use the facility or (ii) 4.6 metres or less in all other areas.
Hi-Vis Convex Mirrors
Hi-vis convex safety mirrors come in round and roundtangular models and feature an unbreakable polycarbonate face with a premium class 1 reflective surface. Brackets and fixings are supplied for easy installation to walls or posts.
Holding Rails, Target Boards and Access Bollards
Holding Rails & Target Boards
Designed for use at pedestrian and cyclist crossings to allow the user to hold on to or rest against while waiting for traffic conditions to change. They are hot dip galvanised prior to being finished with a Yellow powder coat. They come complete with Class 1 Red/White reflective bands. Holding rails are available in two designs, rail only or rail with target board. Target boards are used where a holding rail is mounted at right angles to a path. In-ground sleeves with gibb keys are available in either core drilled or new concrete models.
Access Bollards
The prevention of illegal vehicle access is critical to avoiding damage to the pathways and lightweight bridge structures, particularly when they have been designed only for bicycle and pedestrian use. The bollards are all 140mm in diameter and 1050mm tall in either surface mount, below ground or removable designs with locking sleeves. They are hot dip galvanised, prior to being finished with a Yellow powder coat, and come complete with Class 1Red/White reflective bands.