Access Ramp
One piece access ramps made from slip resistant recycled rubber easily fit in front of your door or any other vertical barrier you might have. These 100% recycled rubber ramps help you effortlessly transition from one height to another. These are the ideal solution for eliminating tripping hazards and creating access pathways for wheelchairs and trolleys. Available in three ramp heights, they can be laid in place or permanently fixed with adhesive.
Aircraft Wheel Chocks
Connected rubber wheel chocks designed for use with light aircraft but can be used in any application. Being connected eliminates individual chocks from going missing.
Anti Collision Strips – Impact Protection
Anti Slip Tape
Architectural Stair Nosing
Product Features:
- Complies with AS1428.1
- Available in a range of profiles
- 3.62m in length
Belt Posts Fixed In-Floor
Choose from stainless steel or durable UPVC plastic. All posts are 63mm in diameter. Fixed in-floor installation using the aluminium slip post kit allows them to rotate for belt alignment while a security fixing prevents unauthorised removal. Available in a choice of six standard or four printed 3 metre belts with brake feature and self-locking clips. Slip post kits sold separately.
Product Features
- Replacement posts & cassettes available for all belt posts.
- Smooth receiver clips to avoid snagging.
- High quality three metre belt.
- Durable self-locking clip.
- Available in six standard colours.
- Built in belt brake controls retraction rate when released.v
Belt Posts Removable In-Floor
Posts are available in stainless steel or durable UPVC plastic. The 63mm removable in-floor posts are a pin and socket design that allow the posts to be quickly deployed or removed without tools, leaving a clear floor. Cassettes are available in a choice of six standard or four printed 3 metre belts with brake feature and self-locking clips. Stainless steel in-floor socket sold separately.
Product Features
- Replacement posts & cassettes available for all belt posts.
- Smooth receiver clips to avoid snagging.
- High quality three metre belt.
- Durable self-locking clip.
- Available in six standard colours.
- Built in belt brake controls retraction rate when released.
Bike Rail – Style 1
Bike rails are manufactured from 48mm diameter mild steel pipe with a 3mm wall. They come in galvanised and powder coated Yellow or galvanised only models. Available in two sizes for surface mount and below ground models. Both models stand 800mm above ground, with 300mm extra for below ground installations.
Installation: Surface mount models have a 6mm thick, 150mm diameter surface mount flange that comes with eight 10 x 50mm masonry anchors. Below ground model has welded concrete starter bars.
Cable Covers
Cable covers are a light duty cable protector for internal installations like offices, retail stores and exhibition spaces. They are designed to protect cables from pedestrian and light trolley traffic. They are available in one, two or three channel 9 metre rolls that can be easily cut to length with a sharp knife.
Cable Protectors – Plastic
Plastic cable protectors come in Two, Three or Five channel design with a polyurethane and rubber construction. They are ideal for festivals, public events and workplaces. It has interlocking ends that allows for cable and hose protection across short or long distances.
Cable Protectors – Rubber
Rubber cable protectors are made from hard wearing moulded rubber and plastic materials in black and safety yellow. They are available in two, three or five channel models and are ideal for protecting cables and hoses at indoor and outdoor locations like offices, exhibition spaces and warehouses and are suitable for light vehicle traffic.
Car Park Signs
Class 1 reflective aluminium & non reflective Polypropylene signs to direct the flow of vehicle traffic in car parks. The class 1 reflective aluminium signs in this range are intended for private car park or off street use. Before using these signs on public road ways please ensure your selection meets the standards and requirements applicable to your state or territory.
Galvanised steel posts, sign mounting brackets & post mounting sleeves also available, post mounting sleeves are available in surface mount, in-ground or core drilled & are supplied with Gibb key.
Compliance Wheel Stop
Created to comply with AS/NZS 2890.1:2004 and produced from high tech Linear Low Density Polyethylene (LLDPE) with sustainability in mind, Compliance Wheel Stop is the clear green choice.
Compliance can be obtained in four standard U.V. stabilised colours - Yellow for increased pedestrian safety and visibility, Blue for highlighting handicapped parking areas, Grey for a concrete-like finish and an economical recycled Black.
Four fixing points allow for exceptional hold-down strength. All come supplied with blanking plugs.
Add a fixing kit to your order from our range of choices which give for a variety of installation demands.
Product Features:
- Environmentally friendly Linear Low Density Polyethylene (LLDPE) provides a solid U.V. stabilised colour
- Easy for one person to install weighing in at 5.5kg
- Fixing systems offered for installation onto concrete, bitumen or asphalt
- Blanking plugs included. Fixings sold separately
Directional Tactile Bar
Raised flat-top tactile bars are used to assist visually impaired individuals of the direction in which the path travels. While used for directional assistance for pedestrian travel, they also provide guidance around obstacles like street furniture in high foot traffic areas.
Disability Wheel Stop
Designed to comply with AS2890.1:2004 & coloured Blue specifically to highlight Disabled parking bays, the compliance wheel stop is manufactured from high-tech Linear Low Density Polyethylene. (LLDPE)
This one-piece wheel stop will not fade, rot or rust & comes complete with matching blanking plugs to conceal the fixings. Optional signage available to provide added visibility if required.
Dock-Safe-Q
Dock-Safe-Q is a lightweight rapid deployment temporary safety barrier system to prevent people tripping or falling from elevated loading docks.
Dock-Safe-Q is comprised of two parts (ordered separately) which can be used in conjunction or separately.
- The Dock-Safe receiver is a moulded rubber block that is mounted directly to the face of the loading dock (fixings supplied), this receiver can act as a dock bumper only or as dock bumper & panel holder.
- The Dock-Safe-Q-panel simply drops into sockets in the receiver, or panels can be used without receiver by core drilling a 50mm diametre hole into the floor to receive the panel posts.
Panels manufactured from blow moulded polyethylene, 2,130mm long x 900mm high, receivers are moulded rubber.