Bike Rail – Style 1
Bike rails are manufactured from 48mm diameter mild steel pipe with a 3mm wall. They come in galvanised and powder coated Yellow or galvanised only models. Available in two sizes for surface mount and below ground models. Both models stand 800mm above ground, with 300mm extra for below ground installations.
Installation: Surface mount models have a 6mm thick, 150mm diameter surface mount flange that comes with eight 10 x 50mm masonry anchors. Below ground model has welded concrete starter bars.
Speed Hump Standard Duty Steel Slo-Motion
Steel speed humps designed for standard duty use in car parks, shopping centres and factory complexes. Ideal for car and forklift traffic.
Speed Hump Heavy Duty Steel Slo-Motion
Steel speed humps designed for heavy duty use in transport depots, factories and terminals. Ideal for truck and bus traffic
Parking Space Protectors
Collapsible parking space protectors are used in private and commercial car parks to stop unauthorised vehicles from occupying a parking spot or entering prohibited areas.
Wheel Chock – Moulded Plastic
Plastic wheel chock stops vehicles, trucks, trailers and caravans from moving when they are parked. Ideal for transport companies, mine sites and caravan owners, this wheel chock is suitable for fixing to a truck or trailer body to ensure the chock is always on hand when required. Truck mount purchased separately.
Wheel Chocks – Urethane
Wheel chocks manufactured from moulded urethane in bright orange colour are suitable for stopping vehicles, trucks, trailers and caravans from moving when not in use. Ideal for transport companies, mine sites and caravan owners.
Anti Collision Strips – Impact Protection
Speed Hump Traffic Calming Rubber Round
Traffic calming rubber hump is designed with a round profile as an alternative to traditional speed hump models. The smooth design allows for use from a wide range of light to heavy vehicles and is made from shock absorbent materials for quiet operation. Ideal for protecting pedestrians by control vehicle traffic speed and suitable for car parks, laneways and driveways.
Rubber Dock Bumpers (D-Section)
Rubber docking bumpers made from heavy duty, blended rubber compound and designed to protect assets from vehicle damage. The popular D-shaped design is ideal for mounting to loading docks, docking bays, jetties and directly onto trucks.
Wheel Chocks – Rubber
Rubber wheel chocks made from moulded recycled black rubber are available in single and double-sided designs. They are suitable for light and heavy duty vehicles such as cars, utes, caravans, buses and trucks. The portable and compact design makes storage in your vehicle easy and non-invasive.
One-Way Access Spikes
The Blade Runner one way access control consist of either a 1,000mm or 500mm heavy duty steel modules & steel end caps.
Each module has independently retracting teeth, when a vehicle approaches from the correct direction the teeth simply retract allowing the vehicle to pass freely, when approached from an unauthorised direction the teeth lock up denying access and risking almost certain tyre damage.
Key features of the one way access spikes include high visibility lime green powder coat finish and an ultra low profile construction to ensure adequate vehicle clearance. The one way access control system has been designed to provide a soft approach for vehicles due to its low ramp angle and reduced height. These same features also eliminate much of the noise commonly associated with older style products.
Six fixing points per metre (4 per 500mm module), heavy steel construction, steel end caps and revolutionary new spring design ensure a long service life with low maintenance.
WARNING: - Always check with your local authority or controlling body to ensure one way access spikes are allowable in your situation (this is the end users responsibility). One way access spikes MUST always be installed with an awareness sign kit. One way access spikes should always be placed clear of intersections and curved roadways. Failure to heed these warnings will void all warranties.
Speed Hump Slo-Motion Compliance
Slo-Motion Compliance Speed Hump is manufactured from Linear Low Density Polyethylene (LLDPE). Lightweight and strong design has the ability to take heavy duty traffic from vehicles, trucks and buses.
Wheel Chock Aircraft – Small Pair
Wheel Chock Aircraft – Large Pair
Bike Rack – Style 4
A sturdy mild steel and hot dip galvanised bike rack designed to be wall mounted to accommodate 1 full size bicycle with the ability to lock one wheel and the frame for total security. The bike is suspended on plastic coated prongs to protect the rims from possible damage. Can be used indoors or out. While galvanised is the standard finish, powder coating is also available on request.
Bike Rail – Style 3
A sturdy bike rail manufactured from marine grade 316 stainless steel and designed to accommodate 2 full size bicycles with the ability to lock both wheels and the frame for total security. Available with fully welded base plates for surface mounting, or extended legs with starter bars for setting into a concrete footing. Can be used indoors or out.
Bike Rail – Style 2
Manufactured from marine grade 316 stainless steel this bike rail is capable of accomodating two full size bicycles. Used indoors or out, the rail has the ability to lock both wheels and the frame for total security. Welded base plates for surface mounting, or extended legs with starter bars for setting into a concrete footing are also available.
Truck mount for WC7P
Galvanised Bike Rail – Below Ground 400mm
Injection Moulded Wheel Chock – Small
Wheel chock manufactured from injection moulded plastic stops cars, trailers and caravans from moving when parked. Suitable for business and personal use, these wheel chocks take up little storage room in your vehicle.
Rubber Dock Bumper
Dock bumpers have been manufactured from heavy duty recycled rubber and moulded into a high performance B shape design. They are ideal for installation onto loading bays or areas where mobile trolleys and hand trucks are in operation and are the suitable solution protection against impact damage.
Wheel Stop Rubber
Rubber wheel stops are a popular low cost alternative to concrete wheel stops. The one piece design is made from black recycled rubber and finished with hi-vis yellow panels. Fixings sold separately to allow installation into concrete or asphalt surfaces..
Wall Protector 800 x 220 x 32mm Black/Yellow – Recycled Rubber
Wall Protectors are made of highly impact resistant rubber to protect walls from cars, trolleys, forklifts and other vehicles from impact. This wall protector benefits from a high quality, incredibly durable reflective strip which makes for high visibility in low light environments. Very easy to install with pre-drilled mounting holes.
Corner Protector
Corner protectors are manufactured from moulded and recycled rubber and finished with black and yellow stripes. They are the ideal solution to protect assets and vehicles from impact damage in car parks, parking complexes and any industrial building. Suitable for absorbing impacts from vehicles and forklifts.