Fold Down Bollard
Galvanised Bike Rail – Below Ground 400mm
Heavy Duty Steel Round Bollards
Heavy duty steel bollards with wall thickness ranging from 5 tp 6.4mm for tough environments. All our steel bollards come hot dip galvanised and are available with or without powder coated surface finishes.
Cast aluminium caps and reflective bands are included while optional chain ring kits are available to purchase separately.
- Also the perfect bollard at home to protect expensive power banks and EV charging stations
Heavy Duty Steel Square Bollards
These square fixed bollards are available as surface mount or in-ground & are designed for traffic control situations or property & asset protection. Manufactured from heavy wall mild steel with a cast aluminium cap.
The bollards are available as hot dip galvanised only, hot dipped galvanised & powder coated Safety Yellow as standard or hot dipped galvanised & custom powder coated.
Surface mount bollards supplied with fixings & in-ground bollards have welded anchor bars.
- Ideal for home use to protect expensive power banks and EV charging stations
Height Bar
Suspended height restriction bar with hanger assemblies and chains
Minimise the risk of damaging vehicles and property caused by oversize vehicles entering areas of restricted height by installing suspended Height Bars.
Height bars are available in a range of standard lengths from 2 metres all the way up to 6 metres. Each height bar is supplied with the necessary chain suspension kits and “LOW CLEARANCE” text, with your specified height in Black lettering on a White vinyl background.
Use height bars at locations where vehicles first enter an undercover area or encounter an overhead obstruction, where the clearance in either case is: (i) 3 metres or less if only cars or light vans are likely to use the facility or (ii) 4.6 metres or less in all other areas.
Hi-Vis Convex Mirrors
Hi-vis convex safety mirrors come in round and roundtangular models and feature an unbreakable polycarbonate face with a premium class 1 reflective surface. Brackets and fixings are supplied for easy installation to walls or posts.
Holding Rails, Target Boards and Access Bollards
Holding Rails & Target Boards
Designed for use at pedestrian and cyclist crossings to allow the user to hold on to or rest against while waiting for traffic conditions to change. They are hot dip galvanised prior to being finished with a Yellow powder coat. They come complete with Class 1 Red/White reflective bands. Holding rails are available in two designs, rail only or rail with target board. Target boards are used where a holding rail is mounted at right angles to a path. In-ground sleeves with gibb keys are available in either core drilled or new concrete models.
Access Bollards
The prevention of illegal vehicle access is critical to avoiding damage to the pathways and lightweight bridge structures, particularly when they have been designed only for bicycle and pedestrian use. The bollards are all 140mm in diameter and 1050mm tall in either surface mount, below ground or removable designs with locking sleeves. They are hot dip galvanised, prior to being finished with a Yellow powder coat, and come complete with Class 1Red/White reflective bands.
Indoor Convex Mirrors
Indoor convex mirrors have an unbreakable polycarbonate face and are used to monitor pedestrian traffic and vehicle movement in retail stores, warehouses, factories and car parks. Brackets and fixings are supplied for easy installation to walls or posts.
Injection Moulded Wheel Chock – Small
Wheel chock manufactured from injection moulded plastic stops cars, trailers and caravans from moving when parked. Suitable for business and personal use, these wheel chocks take up little storage room in your vehicle.