Rubber Dock Bumpers (D-Section)
Rubber docking bumpers made from heavy duty, blended rubber compound and designed to protect assets from vehicle damage. The popular D-shaped design is ideal for mounting to loading docks, docking bays, jetties and directly onto trucks.
Storage Bin System
CaddyRack is a wall mounted storage system that can be configured or extended as required. The durable moulded polypropylene bins with hinged lid simply lift on and off as required. Up to 4 Caddy bins fit on a single aluminium mounting rail. The rail can be cut down, or extended by butting them up. Alternatively Caddy bins can be mounted singularly with either the Caddy wall mounted brackets or magna mount brackets.
Ideal for home workshop, business use - even a great solution in the back of your tradie van.
Pilot Hygiene
Our range of ready-made hygiene kits will help you promote good hygiene practices. More than ever before employees and customers are encouraging businesses to promote safe hygiene practices, and our range of kits make it easy to deploy sanitiser stations through your workplace, office or retail environment. With everything you need to help prevent the spread of germs, our kits make it easy to address these workplace and public concerns. Sanitiser/soap not included.
Wheel Chocks – Urethane
Wheel chocks manufactured from moulded urethane in bright orange colour are suitable for stopping vehicles, trucks, trailers and caravans from moving when not in use. Ideal for transport companies, mine sites and caravan owners.
Expanding Barrier Utility Freestanding
- Three sides that expand out to 2.6 metres
- Width when closed 360mm
- Steps up to 300mm for changing floor levels
- Designed for cordoning off small spaces
- Wall receiver and sign brackets included
- 990mm high, 1090mm high when used with optional castors
Skinz One-Piece Bollard Protection Sleeves
Our tough moulded polyethylene sleeves offer improved impact resistance and cost less than prepping and repainting old bollards. Skinz are available in a range of sizes that fit most common bollard sizes and brands.
Fitting takes seconds and they can be cut down to suit different bollard heights. Reflective tape kits are available on request.
Gal Plus
For around the same price as powder coated models, you can install hot dip galvanised steel bollards fitted with Skinz bollard covers reducing the need for paint and future maintenance costs.
Bollards fitted with plastic sleeves are ideal for congested car parks as they can reduce the impact damage caused to vehicles and bollards when they come into contact with each other. Likewise in shopping centres, maintenance to damaged bollards caused by shopping trolleys can be virtually eliminated.
Skinz sleeves have three grooves designed into the bollard cover that allows reflective tape to lay flush against the sleeve, greatly reducing the chances of the tape peeling.
Fold Down Bollard
Car Park Signs
Class 1 reflective aluminium & non reflective Polypropylene signs to direct the flow of vehicle traffic in car parks. The class 1 reflective aluminium signs in this range are intended for private car park or off street use. Before using these signs on public road ways please ensure your selection meets the standards and requirements applicable to your state or territory.
Galvanised steel posts, sign mounting brackets & post mounting sleeves also available, post mounting sleeves are available in surface mount, in-ground or core drilled & are supplied with Gibb key.
Tee-Lok Removable Bollards – Surface Mount
Surface mount removable bollards are ideal for installation where core drilling or slab penetration is not permitted. Tee-lok bollards are designed with an internal locking system that is activated by a T-handle key unique to this model.
Expanding Barrier Freestanding Maxi
Kerb Ramp – Black & Hi-Vis Yellow
Kerb ramps are a portable black rubber ramp that allow cars, caravans, utes and trucks to easily drive over kerbs and steps. They are ideal for construction sites, distribution centres, emergency crews and caravan owners.
Speed Hump Standard Duty Steel Slo-Motion
Steel speed humps designed for standard duty use in car parks, shopping centres and factory complexes. Ideal for car and forklift traffic.
Hook Post Slimline Portable
An ultra low profile base that minimizes intrusion while maximizing stability. At less than 10mm high, wheelchairs, strollers & suitcases can easily navigate over it, the free standing portable post & base weighs 9.6kgs. A selection of braided ropes & plastic & chain are available & easily attach to the post.
Bike Rail – Style 1
Bike rails are manufactured from 48mm diameter mild steel pipe with a 3mm wall. They come in galvanised and powder coated Yellow or galvanised only models. Available in two sizes for surface mount and below ground models. Both models stand 800mm above ground, with 300mm extra for below ground installations.
Installation: Surface mount models have a 6mm thick, 150mm diameter surface mount flange that comes with eight 10 x 50mm masonry anchors. Below ground model has welded concrete starter bars.
Warning Tactile Round
Individual discrete tactiles are available in 316 stainless steel or durable polyurethane. No messy adhesives necessary just drill and press the step into the mounting hole. Composite tactiles are manufactured from 316 stainless steel with a carborundum insert. Simply drill and press fit for a high end look with maximum slip resistance.
Economy Steel Round Bollard
- Ideal for home use to protect expensive power banks and EV charging station bollard
Height Bar
Suspended height restriction bar with hanger assemblies and chains
Minimise the risk of damaging vehicles and property caused by oversize vehicles entering areas of restricted height by installing suspended Height Bars.
Height bars are available in a range of standard lengths from 2 metres all the way up to 6 metres. Each height bar is supplied with the necessary chain suspension kits and “LOW CLEARANCE” text, with your specified height in Black lettering on a White vinyl background.
Use height bars at locations where vehicles first enter an undercover area or encounter an overhead obstruction, where the clearance in either case is: (i) 3 metres or less if only cars or light vans are likely to use the facility or (ii) 4.6 metres or less in all other areas.
Directional Tactile Bar
Raised flat-top tactile bars are used to assist visually impaired individuals of the direction in which the path travels. While used for directional assistance for pedestrian travel, they also provide guidance around obstacles like street furniture in high foot traffic areas.
Aircraft Wheel Chocks
Connected rubber wheel chocks designed for use with light aircraft but can be used in any application. Being connected eliminates individual chocks from going missing.
Dock-Safe-Q
Dock-Safe-Q is a lightweight rapid deployment temporary safety barrier system to prevent people tripping or falling from elevated loading docks.
Dock-Safe-Q is comprised of two parts (ordered separately) which can be used in conjunction or separately.
- The Dock-Safe receiver is a moulded rubber block that is mounted directly to the face of the loading dock (fixings supplied), this receiver can act as a dock bumper only or as dock bumper & panel holder.
- The Dock-Safe-Q-panel simply drops into sockets in the receiver, or panels can be used without receiver by core drilling a 50mm diametre hole into the floor to receive the panel posts.
Panels manufactured from blow moulded polyethylene, 2,130mm long x 900mm high, receivers are moulded rubber.
Removable Bollards In-ground Cam-Lok
Light Duty Pedestrian Rail
ER-Rail is a flexible and economical warehouse safety barrier that is an ideal attractive and practical solution designed to control the movement of pedestrians. This post and rail system consists of 80 x 30mm aluminium rails in 2, 3 or 6 metre lengths that can be cut to any size with a power saw fitted with an aluminium cutting blade.
Rails are sold separately with optional surface mount (fixings supplied) or below ground posts, brackets and accessories available to allow for post and wall mounted installation. Designed to comply to AS 1657:2013 for balustrades and handrails when installed using ER-Rail mounting brackets.