- Victoria Australia
- 1300 807 525
- sales@trafficsafety.com.au
- Victoria Australia
- 1300 807 525
- sales@trafficsafety.com.au
Height Bar
Suspended height restriction bar with hanger assemblies and chains
Minimise the risk of damaging vehicles and property caused by oversize vehicles entering areas of restricted height by installing suspended Height Bars.
Height bars are available in a range of standard lengths from 2 metres all the way up to 6 metres. Each height bar is supplied with the necessary chain suspension kits and “LOW CLEARANCE” text, with your specified height in Black lettering on a White vinyl background.
Use height bars at locations where vehicles first enter an undercover area or encounter an overhead obstruction, where the clearance in either case is: (i) 3 metres or less if only cars or light vans are likely to use the facility or (ii) 4.6 metres or less in all other areas.
Holding Rails, Target Boards and Access Bollards
Holding Rails & Target Boards
Designed for use at pedestrian and cyclist crossings to allow the user to hold on to or rest against while waiting for traffic conditions to change. They are hot dip galvanised prior to being finished with a Yellow powder coat. They come complete with Class 1 Red/White reflective bands. Holding rails are available in two designs, rail only or rail with target board. Target boards are used where a holding rail is mounted at right angles to a path. In-ground sleeves with gibb keys are available in either core drilled or new concrete models.
Access Bollards
The prevention of illegal vehicle access is critical to avoiding damage to the pathways and lightweight bridge structures, particularly when they have been designed only for bicycle and pedestrian use. The bollards are all 140mm in diameter and 1050mm tall in either surface mount, below ground or removable designs with locking sleeves. They are hot dip galvanised, prior to being finished with a Yellow powder coat, and come complete with Class 1Red/White reflective bands.
Injection Moulded Wheel Chock – Small
Wheel chock manufactured from injection moulded plastic stops cars, trailers and caravans from moving when parked. Suitable for business and personal use, these wheel chocks take up little storage room in your vehicle.
One-Way Access Spikes
The Blade Runner one way access control consist of either a 1,000mm or 500mm heavy duty steel modules & steel end caps.
Each module has independently retracting teeth, when a vehicle approaches from the correct direction the teeth simply retract allowing the vehicle to pass freely, when approached from an unauthorised direction the teeth lock up denying access and risking almost certain tyre damage.
Key features of the one way access spikes include high visibility lime green powder coat finish and an ultra low profile construction to ensure adequate vehicle clearance. The one way access control system has been designed to provide a soft approach for vehicles due to its low ramp angle and reduced height. These same features also eliminate much of the noise commonly associated with older style products.
Six fixing points per metre (4 per 500mm module), heavy steel construction, steel end caps and revolutionary new spring design ensure a long service life with low maintenance.
WARNING: - Always check with your local authority or controlling body to ensure one way access spikes are allowable in your situation (this is the end users responsibility). One way access spikes MUST always be installed with an awareness sign kit. One way access spikes should always be placed clear of intersections and curved roadways. Failure to heed these warnings will void all warranties.
Parking Space Protectors
Collapsible parking space protectors are used in private and commercial car parks to stop unauthorised vehicles from occupying a parking spot or entering prohibited areas.
Rubber Dock Bumper
Dock bumpers have been manufactured from heavy duty recycled rubber and moulded into a high performance B shape design. They are ideal for installation onto loading bays or areas where mobile trolleys and hand trucks are in operation and are the suitable solution protection against impact damage.
Rubber Speed Cushion
Rubber Speed Cushions are made from recycled rubber. Rubber is lighter & easier to work with than asphalt & concrete, significantly reducing installation time.
Rubber pieces can pulled up & moved without being destroyed. This is convenient for municipalities who want to insttute temporary measures to test an area or permanently control traffic speed. Long lasting & cost-efficient, sold as a kit or individual sections if a section is damaged & needs replacing, supplied complete with fixings.
Rubber Speed Hump
Rubber speed humps are made from black recycled and natural rubber. They comprise alternating black and yellow body modules with optional black rubber ends. Rubber speed humps are easy to install by one person, and can be removed when the traffic conditions change. Rubber models are the perfect low priced alternative to steel or concrete speed humps.
Rumble Strip Rubber
Rubber Rumble Strips are designed for use as a speed moderator and lane divider in car parks and driveways. Manufactured from high-quality durable recycled rubber they are available in black and safety yellow. They are also ideal for use as a wall mounted bump protector in parking complexes, warehouses and factories to guard against impact damage.
Speed Hump Heavy Duty Steel Slo-Motion
Steel speed humps designed for heavy duty use in transport depots, factories and terminals. Ideal for truck and bus traffic
Speed Hump Slo-Motion Compliance
Slo-Motion Compliance Speed Hump is manufactured from Linear Low Density Polyethylene (LLDPE). Lightweight and strong design has the ability to take heavy duty traffic from vehicles, trucks and buses.
Speed Hump Standard Duty Steel Slo-Motion
Steel speed humps designed for standard duty use in car parks, shopping centres and factory complexes. Ideal for car and forklift traffic.