Workplace Safety is a broad term that covers many different safety products and equipment. The number one priority of workplace safety is keeping workers, visitors and customers safe at work, and also includes protecting expensive machinery, equipment, structures, and vehicles. SafetyFind’s massive range of workplace safety products includes separation products that allow pedestrians and vehicles to safely coexist, asset protection equipment such as machinery guarding, security bollards and expandable barriers, and queue management, people separation and social distancing through retractable belt barriers, portable fencing and clearly displayed safety signage.
Access Ramp
One piece access ramps made from slip resistant recycled rubber easily fit in front of your door or any other vertical barrier you might have. These 100% recycled rubber ramps help you effortlessly transition from one height to another. These are the ideal solution for eliminating tripping hazards and creating access pathways for wheelchairs and trolleys. Available in three ramp heights, they can be laid in place or permanently fixed with adhesive.
Aircraft Wheel Chocks
Connected rubber wheel chocks designed for use with light aircraft but can be used in any application. Being connected eliminates individual chocks from going missing.
Aluminium Trolley Ramp 900 x 1025mm
The ATR900 is a robust trolley ramp manufactured from 6mm thick aluminium textured floor plate with a total weight of approximately 15kgs. It is designed for pedestrian or hand trolley use with a load limit of 300kgs. With the ability to bridge changes in height up to 200mm, it is ideal around loading docks. Supplied with two stainless steel locating pins that secure the ramp in place, and convenient built-in carry handles to facilitate handling by one person.
Anti Collision Strips – Impact Protection
Anti Slip Tape
Architectural Stair Nosing
Product Features:
- Complies with AS1428.1
- Available in a range of profiles
- 3.62m in length
Bike Rack – Style 4
A sturdy mild steel and hot dip galvanised bike rack designed to be wall mounted to accommodate 1 full size bicycle with the ability to lock one wheel and the frame for total security. The bike is suspended on plastic coated prongs to protect the rims from possible damage. Can be used indoors or out. While galvanised is the standard finish, powder coating is also available on request.
Bike Rack Schoolies
Bike Rail – Style 1
Bike rails are manufactured from 48mm diameter mild steel pipe with a 3mm wall. They come in galvanised and powder coated Yellow or galvanised only models. Available in two sizes for surface mount and below ground models. Both models stand 800mm above ground, with 300mm extra for below ground installations.
Installation: Surface mount models have a 6mm thick, 150mm diameter surface mount flange that comes with eight 10 x 50mm masonry anchors. Below ground model has welded concrete starter bars.
Bike Rail – Style 3
A sturdy bike rail manufactured from marine grade 316 stainless steel and designed to accommodate 2 full size bicycles with the ability to lock both wheels and the frame for total security. Available with fully welded base plates for surface mounting, or extended legs with starter bars for setting into a concrete footing. Can be used indoors or out.
Bike Rail – Style 2
Manufactured from marine grade 316 stainless steel this bike rail is capable of accomodating two full size bicycles. Used indoors or out, the rail has the ability to lock both wheels and the frame for total security. Welded base plates for surface mounting, or extended legs with starter bars for setting into a concrete footing are also available.
Cable Covers
Cable covers are a light duty cable protector for internal installations like offices, retail stores and exhibition spaces. They are designed to protect cables from pedestrian and light trolley traffic. They are available in one, two or three channel 9 metre rolls that can be easily cut to length with a sharp knife.
Cable Protectors – Plastic
Plastic cable protectors come in Two, Three or Five channel design with a polyurethane and rubber construction. They are ideal for festivals, public events and workplaces. It has interlocking ends that allows for cable and hose protection across short or long distances.
Cable Protectors – Rubber
Rubber cable protectors are made from hard wearing moulded rubber and plastic materials in black and safety yellow. They are available in two, three or five channel models and are ideal for protecting cables and hoses at indoor and outdoor locations like offices, exhibition spaces and warehouses and are suitable for light vehicle traffic.
Car Park Signs
Class 1 reflective aluminium & non reflective Polypropylene signs to direct the flow of vehicle traffic in car parks. The class 1 reflective aluminium signs in this range are intended for private car park or off street use. Before using these signs on public road ways please ensure your selection meets the standards and requirements applicable to your state or territory.
Galvanised steel posts, sign mounting brackets & post mounting sleeves also available, post mounting sleeves are available in surface mount, in-ground or core drilled & are supplied with Gibb key.
Compliance Wheel Stop
Created to comply with AS/NZS 2890.1:2004 and produced from high tech Linear Low Density Polyethylene (LLDPE) with sustainability in mind, Compliance Wheel Stop is the clear green choice.
Compliance can be obtained in four standard U.V. stabilised colours - Yellow for increased pedestrian safety and visibility, Blue for highlighting handicapped parking areas, Grey for a concrete-like finish and an economical recycled Black.
Four fixing points allow for exceptional hold-down strength. All come supplied with blanking plugs.
Add a fixing kit to your order from our range of choices which give for a variety of installation demands.
Product Features:
- Environmentally friendly Linear Low Density Polyethylene (LLDPE) provides a solid U.V. stabilised colour
- Easy for one person to install weighing in at 5.5kg
- Fixing systems offered for installation onto concrete, bitumen or asphalt
- Blanking plugs included. Fixings sold separately
Cone Bar Retractable
The retractable cone bar is manufactured from ABS plastic with alternating black and yellow stripes. It is designed to extend and retract to join traffic cones together to create temporary barricading applications.
Corner Protector
Corner protectors are manufactured from moulded and recycled rubber and finished with black and yellow stripes. They are the ideal solution to protect assets and vehicles from impact damage in car parks, parking complexes and any industrial building. Suitable for absorbing impacts from vehicles and forklifts.
Directional Tactile Bar
Raised flat-top tactile bars are used to assist visually impaired individuals of the direction in which the path travels. While used for directional assistance for pedestrian travel, they also provide guidance around obstacles like street furniture in high foot traffic areas.
Dock Plate 1220 x 1220mm – Aluminium
A common problem on loading docks is bridging the gap between a truck and the dock or warehouse floor. Not all trucks are the same height, and the height of the trailer floor within a truck can vary according to how heavily the truck is laden. Thus, there is not only a gap to bridge, but a height difference to overcome. Dock plates are used for lighter loads such as hand trolleys, pallet jacks or foot traffic.
Dock-Safe-Q
Dock-Safe-Q is a lightweight rapid deployment temporary safety barrier system to prevent people tripping or falling from elevated loading docks.
Dock-Safe-Q is comprised of two parts (ordered separately) which can be used in conjunction or separately.
- The Dock-Safe receiver is a moulded rubber block that is mounted directly to the face of the loading dock (fixings supplied), this receiver can act as a dock bumper only or as dock bumper & panel holder.
- The Dock-Safe-Q-panel simply drops into sockets in the receiver, or panels can be used without receiver by core drilling a 50mm diametre hole into the floor to receive the panel posts.
Panels manufactured from blow moulded polyethylene, 2,130mm long x 900mm high, receivers are moulded rubber.
Dome Convex Mirrors
Dome convex safety mirrors are an economical alternative to other expensive models on the market and come in models that provide 90 degree, 180 degree and 360 degree views. They are widely used in convenience stores, milkbars and shops.
- Recommended for indoor use only.
Downpipe Protectors
These bull dog Downpipe Protectors have been designed to guard cables and exposed pipes from the risk of damage caused by maneuvering forklifts and vehicle impacts. Pipe guards defend your vehicle or forklift as well as your downpipes, without intruding on available car parking space. Manufactured from mild steel, the guards are hot dipped galvanised & powder coated Yellow for high visibility & include 6 x pre-drilled mount holes 10mm diameter. Available to suit 100mm or 200mm pipes or cables.
Drop Over Cable-Protector
Drop-over cable protectors are manufactured from moulded polyethylene and features a one channel design with interlocking ends to create continuous cable or hose protection. They protect cables from damage caused by constant foot traffic and prevent fall accidents due to tripping. They are ideal for dropping over floor cables and hoses in the office, at events, in stores or during renovation and construction works.