Tactile Pad
Designed to assist visually impaired pedestrians, tactile pads are 300 x 300mm polyurethane coloured tiles with raised patterns that provide warning of upcoming hazards or to give guidance in a specific direction. The peel and stick nature means they are easy to install by simply preparing the surface, peeling the backing sheet and sticking to your intended location.
Wheel Chocks – Rubber
Rubber wheel chocks made from moulded recycled black rubber are available in single and double-sided designs. They are suitable for light and heavy duty vehicles such as cars, utes, caravans, buses and trucks. The portable and compact design makes storage in your vehicle easy and non-invasive.
Speed Hump Slo-Motion Compliance
Slo-Motion Compliance Speed Hump is manufactured from Linear Low Density Polyethylene (LLDPE). Lightweight and strong design has the ability to take heavy duty traffic from vehicles, trucks and buses.
Small Machine Mirrors
Small convex mirror designed for simple installation onto machinery or forklifts to reduce the number of blind spots and ensure that drivers can view most angles during operation. Ideal for keeping employees and pedestrians safe while moving about warehouses, distribution and logistics centres when machinery is operating.
Anti Collision Strips – Impact Protection
Kerb Ramp – Black & Hi-Vis Yellow
Kerb ramps are a portable black rubber ramp that allow cars, caravans, utes and trucks to easily drive over kerbs and steps. They are ideal for construction sites, distribution centres, emergency crews and caravan owners.
Speed Hump Standard Duty Steel Slo-Motion
Steel speed humps designed for standard duty use in car parks, shopping centres and factory complexes. Ideal for car and forklift traffic.
Drop Over Cable-Protector
Drop-over cable protectors are manufactured from moulded polyethylene and features a one channel design with interlocking ends to create continuous cable or hose protection. They protect cables from damage caused by constant foot traffic and prevent fall accidents due to tripping. They are ideal for dropping over floor cables and hoses in the office, at events, in stores or during renovation and construction works.
Galvanised Bike Rail – Below Ground 400mm
Bike Rail – Style 1
Bike rails are manufactured from 48mm diameter mild steel pipe with a 3mm wall. They come in galvanised and powder coated Yellow or galvanised only models. Available in two sizes for surface mount and below ground models. Both models stand 800mm above ground, with 300mm extra for below ground installations.
Installation: Surface mount models have a 6mm thick, 150mm diameter surface mount flange that comes with eight 10 x 50mm masonry anchors. Below ground model has welded concrete starter bars.
Warning Tactile Round
Individual discrete tactiles are available in 316 stainless steel or durable polyurethane. No messy adhesives necessary just drill and press the step into the mounting hole. Composite tactiles are manufactured from 316 stainless steel with a carborundum insert. Simply drill and press fit for a high end look with maximum slip resistance.
Non-Slip Rubber Floor Mats
This popular non-slip rubber floor mat is manufactured from hard-wearing and high-quality rubber to provide an anti-slip and anti-fatigue surface. The red rubber version is also oil resistant. These non-slip mats are frequently used in workplaces where staff are conducting tasks on their feet for long periods of time, and are ideal for use in commercial kitchens, warehouses, supermarkets and shopping centres, and in accessibility environments.
Cable Covers
Cable covers are a light duty cable protector for internal installations like offices, retail stores and exhibition spaces. They are designed to protect cables from pedestrian and light trolley traffic. They are available in one, two or three channel 9 metre rolls that can be easily cut to length with a sharp knife.
Height Bar
Suspended height restriction bar with hanger assemblies and chains
Minimise the risk of damaging vehicles and property caused by oversize vehicles entering areas of restricted height by installing suspended Height Bars.
Height bars are available in a range of standard lengths from 2 metres all the way up to 6 metres. Each height bar is supplied with the necessary chain suspension kits and “LOW CLEARANCE” text, with your specified height in Black lettering on a White vinyl background.
Use height bars at locations where vehicles first enter an undercover area or encounter an overhead obstruction, where the clearance in either case is: (i) 3 metres or less if only cars or light vans are likely to use the facility or (ii) 4.6 metres or less in all other areas.
Plastic Safety Chain Red
Plastic Safety Chain Yellow
Plastic Safety Chain Red/White
Plastic Safety Chain White
Rubber Dock Bumper
Dock bumpers have been manufactured from heavy duty recycled rubber and moulded into a high performance B shape design. They are ideal for installation onto loading bays or areas where mobile trolleys and hand trucks are in operation and are the suitable solution protection against impact damage.