Galvanised Bike Rail – Below Ground 400mm
Bike Rail – Style 1
Bike rails are manufactured from 48mm diameter mild steel pipe with a 3mm wall. They come in galvanised and powder coated Yellow or galvanised only models. Available in two sizes for surface mount and below ground models. Both models stand 800mm above ground, with 300mm extra for below ground installations.
Installation: Surface mount models have a 6mm thick, 150mm diameter surface mount flange that comes with eight 10 x 50mm masonry anchors. Below ground model has welded concrete starter bars.
Warning Tactile Round
Individual discrete tactiles are available in 316 stainless steel or durable polyurethane. No messy adhesives necessary just drill and press the step into the mounting hole. Composite tactiles are manufactured from 316 stainless steel with a carborundum insert. Simply drill and press fit for a high end look with maximum slip resistance.
Non-Slip Rubber Floor Mats
This popular non-slip rubber floor mat is manufactured from hard-wearing and high-quality rubber to provide an anti-slip and anti-fatigue surface. The red rubber version is also oil resistant. These non-slip mats are frequently used in workplaces where staff are conducting tasks on their feet for long periods of time, and are ideal for use in commercial kitchens, warehouses, supermarkets and shopping centres, and in accessibility environments.
Cable Covers
Cable covers are a light duty cable protector for internal installations like offices, retail stores and exhibition spaces. They are designed to protect cables from pedestrian and light trolley traffic. They are available in one, two or three channel 9 metre rolls that can be easily cut to length with a sharp knife.
Height Bar
Suspended height restriction bar with hanger assemblies and chains
Minimise the risk of damaging vehicles and property caused by oversize vehicles entering areas of restricted height by installing suspended Height Bars.
Height bars are available in a range of standard lengths from 2 metres all the way up to 6 metres. Each height bar is supplied with the necessary chain suspension kits and “LOW CLEARANCE” text, with your specified height in Black lettering on a White vinyl background.
Use height bars at locations where vehicles first enter an undercover area or encounter an overhead obstruction, where the clearance in either case is: (i) 3 metres or less if only cars or light vans are likely to use the facility or (ii) 4.6 metres or less in all other areas.
Plastic Safety Chain Red
Plastic Safety Chain Yellow
Plastic Safety Chain Red/White
Plastic Safety Chain White
Rubber Dock Bumper
Dock bumpers have been manufactured from heavy duty recycled rubber and moulded into a high performance B shape design. They are ideal for installation onto loading bays or areas where mobile trolleys and hand trucks are in operation and are the suitable solution protection against impact damage.
Directional Tactile Bar
Raised flat-top tactile bars are used to assist visually impaired individuals of the direction in which the path travels. While used for directional assistance for pedestrian travel, they also provide guidance around obstacles like street furniture in high foot traffic areas.
Aircraft Wheel Chocks
Connected rubber wheel chocks designed for use with light aircraft but can be used in any application. Being connected eliminates individual chocks from going missing.
Dock-Safe-Q
Dock-Safe-Q is a lightweight rapid deployment temporary safety barrier system to prevent people tripping or falling from elevated loading docks.
Dock-Safe-Q is comprised of two parts (ordered separately) which can be used in conjunction or separately.
- The Dock-Safe receiver is a moulded rubber block that is mounted directly to the face of the loading dock (fixings supplied), this receiver can act as a dock bumper only or as dock bumper & panel holder.
- The Dock-Safe-Q-panel simply drops into sockets in the receiver, or panels can be used without receiver by core drilling a 50mm diametre hole into the floor to receive the panel posts.
Panels manufactured from blow moulded polyethylene, 2,130mm long x 900mm high, receivers are moulded rubber.
Kerb Ramp Rubber
Our best-selling kerb ramps are made from durable recycled black rubber and are designed to improve car, truck, forklift and hand trolley access over changes in ground levels like kerbs (curbs) and steps.
The diamond tread helps provide a non-slip/skid surface on the kerb ramp, and the portable and compact design makes it easy to store in your vehicle when not in use.
Speed Hump Traffic Calming
Traffic calming speed hump system is designed with interlocking body and end modules that are made from solid natural and recycled rubber. It comes with fixings for immediate installation into asphalt or concrete surfaces.
Indoor Convex Mirrors
Indoor convex mirrors have an unbreakable polycarbonate face and are used to monitor pedestrian traffic and vehicle movement in retail stores, warehouses, factories and car parks. Brackets and fixings are supplied for easy installation to walls or posts.
Wheel Chock Aircraft – Small Pair
Architectural Stair Nosing
Product Features:
- Complies with AS1428.1
- Available in a range of profiles
- 3.62m in length
Wheel Stop Rubber
Rubber wheel stops are a popular low cost alternative to concrete wheel stops. The one piece design is made from black recycled rubber and finished with hi-vis yellow panels. Fixings sold separately to allow installation into concrete or asphalt surfaces..
Cable Protectors – Rubber
Rubber cable protectors are made from hard wearing moulded rubber and plastic materials in black and safety yellow. They are available in two, three or five channel models and are ideal for protecting cables and hoses at indoor and outdoor locations like offices, exhibition spaces and warehouses and are suitable for light vehicle traffic.
Midline Economy Hook Post
Speed Hump Heavy Duty Steel Slo-Motion
Steel speed humps designed for heavy duty use in transport depots, factories and terminals. Ideal for truck and bus traffic
Outdoor Convex Mirrors
Outdoor convex mirrors feature a weatherproof polycarbonate face and are typically mounted to walls or posts for installation. Safety mirrors are ideal for road and pedestrian traffic monitoring in distribution centres, parking complexes and car parks.
Access Ramp
One piece access ramps made from slip resistant recycled rubber easily fit in front of your door or any other vertical barrier you might have. These 100% recycled rubber ramps help you effortlessly transition from one height to another. These are the ideal solution for eliminating tripping hazards and creating access pathways for wheelchairs and trolleys. Available in three ramp heights, they can be laid in place or permanently fixed with adhesive.
Bike Rack – Style 4
A sturdy mild steel and hot dip galvanised bike rack designed to be wall mounted to accommodate 1 full size bicycle with the ability to lock one wheel and the frame for total security. The bike is suspended on plastic coated prongs to protect the rims from possible damage. Can be used indoors or out. While galvanised is the standard finish, powder coating is also available on request.
Portable Trolley Ramp 4.2kg
Hi-Vis Convex Mirrors
Hi-vis convex safety mirrors come in round and roundtangular models and feature an unbreakable polycarbonate face with a premium class 1 reflective surface. Brackets and fixings are supplied for easy installation to walls or posts.