Truck Wheel Stop
Designed to withstand the weight of heavy vehicles and machinery when driving into parking bays. Manufactured from 5mm heavy wall steel tube and hot dip galvanised. Recommended for installation into concrete surfaces only. Fixings included.
Compliance Wheel Stop
Created to comply with AS/NZS 2890.1:2004 and produced from high tech Linear Low Density Polyethylene (LLDPE) with sustainability in mind, Compliance Wheel Stop is the clear green choice.
Compliance can be obtained in four standard U.V. stabilised colours - Yellow for increased pedestrian safety and visibility, Blue for highlighting handicapped parking areas, Grey for a concrete-like finish and an economical recycled Black.
Four fixing points allow for exceptional hold-down strength. All come supplied with blanking plugs.
Add a fixing kit to your order from our range of choices which give for a variety of installation demands.
Product Features:
- Environmentally friendly Linear Low Density Polyethylene (LLDPE) provides a solid U.V. stabilised colour
- Easy for one person to install weighing in at 5.5kg
- Fixing systems offered for installation onto concrete, bitumen or asphalt
- Blanking plugs included. Fixings sold separately
Skinz One-Piece Bollard Protection Sleeves
Our tough moulded polyethylene sleeves offer improved impact resistance and cost less than prepping and repainting old bollards. Skinz are available in a range of sizes that fit most common bollard sizes and brands.
Fitting takes seconds and they can be cut down to suit different bollard heights. Reflective tape kits are available on request.
Cam-Lok Removable Bollards – Surface Mount
Surface mount removable bollards are ideal for installation where core drilling or slab penetration is not permitted. Cam-lok bollards are designed with a high quality 'bi-lock' removable core lock mechanism that is supplied with two security registered keys per bollard order.
Tee-Lok Removable Bollards – Surface Mount
Surface mount removable bollards are ideal for installation where core drilling or slab penetration is not permitted. Tee-lok bollards are designed with an internal locking system that is activated by a T-handle key unique to this model.
Bike Rail – Style 1
Bike rails are manufactured from 48mm diameter mild steel pipe with a 3mm wall. They come in galvanised and powder coated Yellow or galvanised only models. Available in two sizes for surface mount and below ground models. Both models stand 800mm above ground, with 300mm extra for below ground installations.
Installation: Surface mount models have a 6mm thick, 150mm diameter surface mount flange that comes with eight 10 x 50mm masonry anchors. Below ground model has welded concrete starter bars.
Speed Hump Standard Duty Steel Slo-Motion
Steel speed humps designed for standard duty use in car parks, shopping centres and factory complexes. Ideal for car and forklift traffic.
Speed Hump Heavy Duty Steel Slo-Motion
Steel speed humps designed for heavy duty use in transport depots, factories and terminals. Ideal for truck and bus traffic
Parking Space Protectors
Collapsible parking space protectors are used in private and commercial car parks to stop unauthorised vehicles from occupying a parking spot or entering prohibited areas.
Wheel Chock – Moulded Plastic
Plastic wheel chock stops vehicles, trucks, trailers and caravans from moving when they are parked. Ideal for transport companies, mine sites and caravan owners, this wheel chock is suitable for fixing to a truck or trailer body to ensure the chock is always on hand when required. Truck mount purchased separately.
Wheel Chocks – Urethane
Wheel chocks manufactured from moulded urethane in bright orange colour are suitable for stopping vehicles, trucks, trailers and caravans from moving when not in use. Ideal for transport companies, mine sites and caravan owners.
Anti Collision Strips – Impact Protection
Speed Hump Traffic Calming Rubber Round
Traffic calming rubber hump is designed with a round profile as an alternative to traditional speed hump models. The smooth design allows for use from a wide range of light to heavy vehicles and is made from shock absorbent materials for quiet operation. Ideal for protecting pedestrians by control vehicle traffic speed and suitable for car parks, laneways and driveways.
Rubber Dock Bumpers (D-Section)
Rubber docking bumpers made from heavy duty, blended rubber compound and designed to protect assets from vehicle damage. The popular D-shaped design is ideal for mounting to loading docks, docking bays, jetties and directly onto trucks.
Wheel Chocks – Rubber
Rubber wheel chocks made from moulded recycled black rubber are available in single and double-sided designs. They are suitable for light and heavy duty vehicles such as cars, utes, caravans, buses and trucks. The portable and compact design makes storage in your vehicle easy and non-invasive.
One-Way Access Spikes
The Blade Runner one way access control consist of either a 1,000mm or 500mm heavy duty steel modules & steel end caps.
Each module has independently retracting teeth, when a vehicle approaches from the correct direction the teeth simply retract allowing the vehicle to pass freely, when approached from an unauthorised direction the teeth lock up denying access and risking almost certain tyre damage.
Key features of the one way access spikes include high visibility lime green powder coat finish and an ultra low profile construction to ensure adequate vehicle clearance. The one way access control system has been designed to provide a soft approach for vehicles due to its low ramp angle and reduced height. These same features also eliminate much of the noise commonly associated with older style products.
Six fixing points per metre (4 per 500mm module), heavy steel construction, steel end caps and revolutionary new spring design ensure a long service life with low maintenance.
WARNING: - Always check with your local authority or controlling body to ensure one way access spikes are allowable in your situation (this is the end users responsibility). One way access spikes MUST always be installed with an awareness sign kit. One way access spikes should always be placed clear of intersections and curved roadways. Failure to heed these warnings will void all warranties.
Speed Hump Slo-Motion Compliance
Slo-Motion Compliance Speed Hump is manufactured from Linear Low Density Polyethylene (LLDPE). Lightweight and strong design has the ability to take heavy duty traffic from vehicles, trucks and buses.
Wheel Chock Aircraft – Small Pair
Wheel Chock Aircraft – Large Pair
Bike Rack Schoolies
Bike Rack – Style 4
A sturdy mild steel and hot dip galvanised bike rack designed to be wall mounted to accommodate 1 full size bicycle with the ability to lock one wheel and the frame for total security. The bike is suspended on plastic coated prongs to protect the rims from possible damage. Can be used indoors or out. While galvanised is the standard finish, powder coating is also available on request.
Bike Rail – Style 3
A sturdy bike rail manufactured from marine grade 316 stainless steel and designed to accommodate 2 full size bicycles with the ability to lock both wheels and the frame for total security. Available with fully welded base plates for surface mounting, or extended legs with starter bars for setting into a concrete footing. Can be used indoors or out.
Bike Rail – Style 2
Manufactured from marine grade 316 stainless steel this bike rail is capable of accomodating two full size bicycles. Used indoors or out, the rail has the ability to lock both wheels and the frame for total security. Welded base plates for surface mounting, or extended legs with starter bars for setting into a concrete footing are also available.
Truck mount for WC7P