Dock Board 1525 x 1525mm – Aluminium
Dock Boards serve a similar purpose to dock plates but are designed to cope with heavier machinery like forklifts. They consist of a plate deck with steel curbs on both sides to prevent run-offs and provide additional strength and stability. Dock boards can be quite heavy and therefore, include carry chains so they can be transported by the forklift. Alternative dock plates and boards in a range of sizes and load ratings are available on request.
Dock Plate 1220 x 1220mm – Aluminium
A common problem on loading docks is bridging the gap between a truck and the dock or warehouse floor. Not all trucks are the same height, and the height of the trailer floor within a truck can vary according to how heavily the truck is laden. Thus, there is not only a gap to bridge, but a height difference to overcome. Dock plates are used for lighter loads such as hand trolleys, pallet jacks or foot traffic.
Dock-Safe-Q
Dock-Safe-Q is a lightweight rapid deployment temporary safety barrier system to prevent people tripping or falling from elevated loading docks.
Dock-Safe-Q is comprised of two parts (ordered separately) which can be used in conjunction or separately.
- The Dock-Safe receiver is a moulded rubber block that is mounted directly to the face of the loading dock (fixings supplied), this receiver can act as a dock bumper only or as dock bumper & panel holder.
- The Dock-Safe-Q-panel simply drops into sockets in the receiver, or panels can be used without receiver by core drilling a 50mm diametre hole into the floor to receive the panel posts.
Panels manufactured from blow moulded polyethylene, 2,130mm long x 900mm high, receivers are moulded rubber.
Dome Convex Mirrors
Dome convex safety mirrors are an economical alternative to other expensive models on the market and come in models that provide 90 degree, 180 degree and 360 degree views. They are widely used in convenience stores, milkbars and shops.
- Recommended for indoor use only.
Downpipe Protectors
These bull dog Downpipe Protectors have been designed to guard cables and exposed pipes from the risk of damage caused by maneuvering forklifts and vehicle impacts. Pipe guards defend your vehicle or forklift as well as your downpipes, without intruding on available car parking space. Manufactured from mild steel, the guards are hot dipped galvanised & powder coated Yellow for high visibility & include 6 x pre-drilled mount holes 10mm diameter. Available to suit 100mm or 200mm pipes or cables.
Drop Over Cable-Protector
Drop-over cable protectors are manufactured from moulded polyethylene and features a one channel design with interlocking ends to create continuous cable or hose protection. They protect cables from damage caused by constant foot traffic and prevent fall accidents due to tripping. They are ideal for dropping over floor cables and hoses in the office, at events, in stores or during renovation and construction works.