Injection Moulded Wheel Chock – Small
Wheel chock manufactured from injection moulded plastic stops cars, trailers and caravans from moving when parked. Suitable for business and personal use, these wheel chocks take up little storage room in your vehicle.
Wheel Chocks – Urethane
Wheel chocks manufactured from moulded urethane in bright orange colour are suitable for stopping vehicles, trucks, trailers and caravans from moving when not in use. Ideal for transport companies, mine sites and caravan owners.
Rumble Strip Rubber
Rubber Rumble Strips are designed for use as a speed moderator and lane divider in car parks and driveways. Manufactured from high-quality durable recycled rubber they are available in black and safety yellow. They are also ideal for use as a wall mounted bump protector in parking complexes, warehouses and factories to guard against impact damage.
Truck mount for WC7P
Speed Hump Traffic Calming Rubber Round
Traffic calming rubber hump is designed with a round profile as an alternative to traditional speed hump models. The smooth design allows for use from a wide range of light to heavy vehicles and is made from shock absorbent materials for quiet operation. Ideal for protecting pedestrians by control vehicle traffic speed and suitable for car parks, laneways and driveways.
Compliance Wheel Stop
Created to comply with AS/NZS 2890.1:2004 and produced from high tech Linear Low Density Polyethylene (LLDPE) with sustainability in mind, Compliance Wheel Stop is the clear green choice.
Compliance can be obtained in four standard U.V. stabilised colours - Yellow for increased pedestrian safety and visibility, Blue for highlighting handicapped parking areas, Grey for a concrete-like finish and an economical recycled Black.
Four fixing points allow for exceptional hold-down strength. All come supplied with blanking plugs.
Add a fixing kit to your order from our range of choices which give for a variety of installation demands.
Product Features:
- Environmentally friendly Linear Low Density Polyethylene (LLDPE) provides a solid U.V. stabilised colour
- Easy for one person to install weighing in at 5.5kg
- Fixing systems offered for installation onto concrete, bitumen or asphalt
- Blanking plugs included. Fixings sold separately
Rubber Speed Hump
Rubber speed humps are made from black recycled and natural rubber. They comprise alternating black and yellow body modules with optional black rubber ends. Rubber speed humps are easy to install by one person, and can be removed when the traffic conditions change. Rubber models are the perfect low priced alternative to steel or concrete speed humps.
Car Park Signs
Class 1 reflective aluminium & non reflective Polypropylene signs to direct the flow of vehicle traffic in car parks. The class 1 reflective aluminium signs in this range are intended for private car park or off street use. Before using these signs on public road ways please ensure your selection meets the standards and requirements applicable to your state or territory.
Galvanised steel posts, sign mounting brackets & post mounting sleeves also available, post mounting sleeves are available in surface mount, in-ground or core drilled & are supplied with Gibb key.
Cone Bar Retractable
The retractable cone bar is manufactured from ABS plastic with alternating black and yellow stripes. It is designed to extend and retract to join traffic cones together to create temporary barricading applications.
Wheel Chock – Moulded Plastic
Plastic wheel chock stops vehicles, trucks, trailers and caravans from moving when they are parked. Ideal for transport companies, mine sites and caravan owners, this wheel chock is suitable for fixing to a truck or trailer body to ensure the chock is always on hand when required. Truck mount purchased separately.
Wheel Chocks – Rubber
Rubber wheel chocks made from moulded recycled black rubber are available in single and double-sided designs. They are suitable for light and heavy duty vehicles such as cars, utes, caravans, buses and trucks. The portable and compact design makes storage in your vehicle easy and non-invasive.
Speed Hump Slo-Motion Compliance
Slo-Motion Compliance Speed Hump is manufactured from Linear Low Density Polyethylene (LLDPE). Lightweight and strong design has the ability to take heavy duty traffic from vehicles, trucks and buses.
Kerb Ramp – Black & Hi-Vis Yellow
Kerb ramps are a portable black rubber ramp that allow cars, caravans, utes and trucks to easily drive over kerbs and steps. They are ideal for construction sites, distribution centres, emergency crews and caravan owners.
Speed Hump Standard Duty Steel Slo-Motion
Steel speed humps designed for standard duty use in car parks, shopping centres and factory complexes. Ideal for car and forklift traffic.
Galvanised Bike Rail – Below Ground 400mm
Bike Rail – Style 1
Bike rails are manufactured from 48mm diameter mild steel pipe with a 3mm wall. They come in galvanised and powder coated Yellow or galvanised only models. Available in two sizes for surface mount and below ground models. Both models stand 800mm above ground, with 300mm extra for below ground installations.
Installation: Surface mount models have a 6mm thick, 150mm diameter surface mount flange that comes with eight 10 x 50mm masonry anchors. Below ground model has welded concrete starter bars.
Height Bar
Suspended height restriction bar with hanger assemblies and chains
Minimise the risk of damaging vehicles and property caused by oversize vehicles entering areas of restricted height by installing suspended Height Bars.
Height bars are available in a range of standard lengths from 2 metres all the way up to 6 metres. Each height bar is supplied with the necessary chain suspension kits and “LOW CLEARANCE” text, with your specified height in Black lettering on a White vinyl background.
Use height bars at locations where vehicles first enter an undercover area or encounter an overhead obstruction, where the clearance in either case is: (i) 3 metres or less if only cars or light vans are likely to use the facility or (ii) 4.6 metres or less in all other areas.
Rubber Dock Bumper
Dock bumpers have been manufactured from heavy duty recycled rubber and moulded into a high performance B shape design. They are ideal for installation onto loading bays or areas where mobile trolleys and hand trucks are in operation and are the suitable solution protection against impact damage.
Aircraft Wheel Chocks
Connected rubber wheel chocks designed for use with light aircraft but can be used in any application. Being connected eliminates individual chocks from going missing.
Dock-Safe-Q
Dock-Safe-Q is a lightweight rapid deployment temporary safety barrier system to prevent people tripping or falling from elevated loading docks.
Dock-Safe-Q is comprised of two parts (ordered separately) which can be used in conjunction or separately.
- The Dock-Safe receiver is a moulded rubber block that is mounted directly to the face of the loading dock (fixings supplied), this receiver can act as a dock bumper only or as dock bumper & panel holder.
- The Dock-Safe-Q-panel simply drops into sockets in the receiver, or panels can be used without receiver by core drilling a 50mm diametre hole into the floor to receive the panel posts.
Panels manufactured from blow moulded polyethylene, 2,130mm long x 900mm high, receivers are moulded rubber.
Speed Hump Traffic Calming
Traffic calming speed hump system is designed with interlocking body and end modules that are made from solid natural and recycled rubber. It comes with fixings for immediate installation into asphalt or concrete surfaces.
Wheel Chock Aircraft – Small Pair
Wheel Stop Rubber
Rubber wheel stops are a popular low cost alternative to concrete wheel stops. The one piece design is made from black recycled rubber and finished with hi-vis yellow panels. Fixings sold separately to allow installation into concrete or asphalt surfaces..