Rumble Strip Rubber
Rubber Rumble Strips are designed for use as a speed moderator and lane divider in car parks and driveways. Manufactured from high-quality durable recycled rubber they are available in black and safety yellow. They are also ideal for use as a wall mounted bump protector in parking complexes, warehouses and factories to guard against impact damage.
Speed Hump Traffic Calming
Traffic calming speed hump system is designed with interlocking body and end modules that are made from solid natural and recycled rubber. It comes with fixings for immediate installation into asphalt or concrete surfaces.
Rubber Speed Hump
Rubber speed humps are made from black recycled and natural rubber. They comprise alternating black and yellow body modules with optional black rubber ends. Rubber speed humps are easy to install by one person, and can be removed when the traffic conditions change. Rubber models are the perfect low priced alternative to steel or concrete speed humps.
Height Bar
Suspended height restriction bar with hanger assemblies and chains
Minimise the risk of damaging vehicles and property caused by oversize vehicles entering areas of restricted height by installing suspended Height Bars.
Height bars are available in a range of standard lengths from 2 metres all the way up to 6 metres. Each height bar is supplied with the necessary chain suspension kits and “LOW CLEARANCE” text, with your specified height in Black lettering on a White vinyl background.
Use height bars at locations where vehicles first enter an undercover area or encounter an overhead obstruction, where the clearance in either case is: (i) 3 metres or less if only cars or light vans are likely to use the facility or (ii) 4.6 metres or less in all other areas.
Truck Wheel Stop
Designed to withstand the weight of heavy vehicles and machinery when driving into parking bays. Manufactured from 5mm heavy wall steel tube and hot dip galvanised. Recommended for installation into concrete surfaces only. Fixings included.
Compliance Wheel Stop
Created to comply with AS/NZS 2890.1:2004 and produced from high tech Linear Low Density Polyethylene (LLDPE) with sustainability in mind, Compliance Wheel Stop is the clear green choice.
Compliance can be obtained in four standard U.V. stabilised colours - Yellow for increased pedestrian safety and visibility, Blue for highlighting handicapped parking areas, Grey for a concrete-like finish and an economical recycled Black.
Four fixing points allow for exceptional hold-down strength. All come supplied with blanking plugs.
Add a fixing kit to your order from our range of choices which give for a variety of installation demands.
Product Features:
- Environmentally friendly Linear Low Density Polyethylene (LLDPE) provides a solid U.V. stabilised colour
- Easy for one person to install weighing in at 5.5kg
- Fixing systems offered for installation onto concrete, bitumen or asphalt
- Blanking plugs included. Fixings sold separately
Bike Rail – Style 1
Bike rails are manufactured from 48mm diameter mild steel pipe with a 3mm wall. They come in galvanised and powder coated Yellow or galvanised only models. Available in two sizes for surface mount and below ground models. Both models stand 800mm above ground, with 300mm extra for below ground installations.
Installation: Surface mount models have a 6mm thick, 150mm diameter surface mount flange that comes with eight 10 x 50mm masonry anchors. Below ground model has welded concrete starter bars.
Speed Hump Standard Duty Steel Slo-Motion
Steel speed humps designed for standard duty use in car parks, shopping centres and factory complexes. Ideal for car and forklift traffic.
Speed Hump Heavy Duty Steel Slo-Motion
Steel speed humps designed for heavy duty use in transport depots, factories and terminals. Ideal for truck and bus traffic