Aluminium Trolley Ramp 900 x 1025mm
The ATR900 is a robust trolley ramp manufactured from 6mm thick aluminium textured floor plate with a total weight of approximately 15kgs. It is designed for pedestrian or hand trolley use with a load limit of 300kgs. With the ability to bridge changes in height up to 200mm, it is ideal around loading docks. Supplied with two stainless steel locating pins that secure the ramp in place, and convenient built-in carry handles to facilitate handling by one person.
Belt Magnetic Polycarbonate
Bicycle Path Bollards & Rails
Bike Rack Schoolies
Bike Rail – Style 3
A sturdy bike rail manufactured from marine grade 316 stainless steel and designed to accommodate 2 full size bicycles with the ability to lock both wheels and the frame for total security. Available with fully welded base plates for surface mounting, or extended legs with starter bars for setting into a concrete footing. Can be used indoors or out.
Bike Rail – Style 2
Manufactured from marine grade 316 stainless steel this bike rail is capable of accomodating two full size bicycles. Used indoors or out, the rail has the ability to lock both wheels and the frame for total security. Welded base plates for surface mounting, or extended legs with starter bars for setting into a concrete footing are also available.
Cable Protectors – Plastic
Plastic cable protectors come in Two, Three or Five channel design with a polyurethane and rubber construction. They are ideal for festivals, public events and workplaces. It has interlocking ends that allows for cable and hose protection across short or long distances.
Cam-Lok Removable Bollards – Surface Mount
Surface mount removable bollards are ideal for installation where core drilling or slab penetration is not permitted. Cam-lok bollards are designed with a high quality 'bi-lock' removable core lock mechanism that is supplied with two security registered keys per bollard order.
Co-Pilot Post & Base
Got a wind problem? Let the Co-Pilot take care of it. The biggest problem with long reach belt barriers used outside is wind. With its 20kg cast iron base and stainless steel post, Co-Pilot provides stability and mobility, while the 75mm non-marking polyurethane wheels and pozi-grip handle make positioning as simple as tilt and walk.
If necessary, stability can be increased even further through the addition of optional 10kg base weights, Up to two base weights at 10kgs each can be added bringing the total weight of the Co-pilot base up to 40kgs. Base weights can be added or removed at any time without the need for tools.
Directional Tactile Bar
Raised flat-top tactile bars are used to assist visually impaired individuals of the direction in which the path travels. While used for directional assistance for pedestrian travel, they also provide guidance around obstacles like street furniture in high foot traffic areas.
Dock Board 1525 x 1525mm – Aluminium
Dock Boards serve a similar purpose to dock plates but are designed to cope with heavier machinery like forklifts. They consist of a plate deck with steel curbs on both sides to prevent run-offs and provide additional strength and stability. Dock boards can be quite heavy and therefore, include carry chains so they can be transported by the forklift. Alternative dock plates and boards in a range of sizes and load ratings are available on request.
Dock Plate 1220 x 1220mm – Aluminium
A common problem on loading docks is bridging the gap between a truck and the dock or warehouse floor. Not all trucks are the same height, and the height of the trailer floor within a truck can vary according to how heavily the truck is laden. Thus, there is not only a gap to bridge, but a height difference to overcome. Dock plates are used for lighter loads such as hand trolleys, pallet jacks or foot traffic.
Dock-Safe-Q
Dock-Safe-Q is a lightweight rapid deployment temporary safety barrier system to prevent people tripping or falling from elevated loading docks.
Dock-Safe-Q is comprised of two parts (ordered separately) which can be used in conjunction or separately.
- The Dock-Safe receiver is a moulded rubber block that is mounted directly to the face of the loading dock (fixings supplied), this receiver can act as a dock bumper only or as dock bumper & panel holder.
- The Dock-Safe-Q-panel simply drops into sockets in the receiver, or panels can be used without receiver by core drilling a 50mm diametre hole into the floor to receive the panel posts.
Panels manufactured from blow moulded polyethylene, 2,130mm long x 900mm high, receivers are moulded rubber.
Dome Convex Mirrors
Dome convex safety mirrors are an economical alternative to other expensive models on the market and come in models that provide 90 degree, 180 degree and 360 degree views. They are widely used in convenience stores, milkbars and shops.
- Recommended for indoor use only.
Downpipe Protectors
These bull dog Downpipe Protectors have been designed to guard cables and exposed pipes from the risk of damage caused by maneuvering forklifts and vehicle impacts. Pipe guards defend your vehicle or forklift as well as your downpipes, without intruding on available car parking space. Manufactured from mild steel, the guards are hot dipped galvanised & powder coated Yellow for high visibility & include 6 x pre-drilled mount holes 10mm diameter. Available to suit 100mm or 200mm pipes or cables.
Economy Steel Round Bollard
- Ideal for home use to protect expensive power banks and EV charging station bollard
Event Fence Crowd Control Barrier
Expanding Barrier Freestanding Maxi
Expanding Barrier Utility Freestanding
- Three sides that expand out to 2.6 metres
- Width when closed 360mm
- Steps up to 300mm for changing floor levels
- Designed for cordoning off small spaces
- Wall receiver and sign brackets included
- 990mm high, 1090mm high when used with optional castors
Foam-Filled Column Cushion
Column Cushion, also known as a Column Protector, helps prevent damage to structural columns by surrounding them with a foam-filled polyethylene cushion. Available in a range of standard sizes that fit most square or round columns, the two blow-moulded hard shells can be installed in seconds without the need for any tools, and removed at any time for cleaning or maintenance.
Unlike most moulded column protectors which simply contain air, Column Cushion is filled with injectable expanding foam. This foam dramatically increases impact protection and helps the Column Cushion return to shape after impact. So while other column protectors may look similar, ONLY Column Cushion by Barrier Group has the added advantage of foam fill.
Product Features:
- a foam-filled polyethylene cushion.
- Moulded from high impact polyethylene in bright Yellow with contrasting Black straps.
- Can be used singularly or stacked in pairs.
- U.V. stabilised for indoor or outdoor use.
- Surprisingly cost-effective and maintenance free.
- Extremely versatile and durable.
- Chemical resistant, non-conductive and waterproof.