One-Way Access Spikes
The Blade Runner one way access control consist of either a 1,000mm or 500mm heavy duty steel modules & steel end caps.
Each module has independently retracting teeth, when a vehicle approaches from the correct direction the teeth simply retract allowing the vehicle to pass freely, when approached from an unauthorised direction the teeth lock up denying access and risking almost certain tyre damage.
Key features of the one way access spikes include high visibility lime green powder coat finish and an ultra low profile construction to ensure adequate vehicle clearance. The one way access control system has been designed to provide a soft approach for vehicles due to its low ramp angle and reduced height. These same features also eliminate much of the noise commonly associated with older style products.
Six fixing points per metre (4 per 500mm module), heavy steel construction, steel end caps and revolutionary new spring design ensure a long service life with low maintenance.
WARNING: - Always check with your local authority or controlling body to ensure one way access spikes are allowable in your situation (this is the end users responsibility). One way access spikes MUST always be installed with an awareness sign kit. One way access spikes should always be placed clear of intersections and curved roadways. Failure to heed these warnings will void all warranties.
Outdoor Convex Mirrors
Outdoor convex mirrors feature a weatherproof polycarbonate face and are typically mounted to walls or posts for installation. Safety mirrors are ideal for road and pedestrian traffic monitoring in distribution centres, parking complexes and car parks.
Parking Space Protectors
Collapsible parking space protectors are used in private and commercial car parks to stop unauthorised vehicles from occupying a parking spot or entering prohibited areas.
Pilot 25 Metre Belt
The Pilot 25 extends to a class leading 25 metres with a dependable manual rewind with left or right handed operation, and positive locking at any point along its 25 metres. Specifically designed for applications requiring a long reach belt such as loading docks and airport staging areas that are susceptible to the elements. When coupled with a range of accessories the Pilot 25 can be used in pairs to cover up to 50 metres with a choice of portable or fixed mounting options.
Pilot Hygiene
Our range of ready-made hygiene kits will help you promote good hygiene practices. More than ever before employees and customers are encouraging businesses to promote safe hygiene practices, and our range of kits make it easy to deploy sanitiser stations through your workplace, office or retail environment. With everything you need to help prevent the spread of germs, our kits make it easy to address these workplace and public concerns. Sanitiser/soap not included.
Pilot Telescopic Multi Post
Whatever you want it to be! The telescopic post is mounted to a mobile 20kg cast iron base that can extend 700mm from 1300mm to 2000mm or be locked anywhere between. Compatible with all Pilot accessories, Multi-Post can be configured in numerous ways using the included accessory mountings.
In outdoor or windy conditions the stability of Multi-Post can be increased through the addition of optional 10kg base weights Up to two base weights at 10kgs each can be added bringing the total weight of the Multi-Post base to 40kgs. The weights can be added or removed at anytime without the need for tools.
Pilot Wall-Mount Bracket – Value Pack of 10
Pilot Wall-Mount Bracket - Value Pack of 10
Portable Crowd-Q Plastic Fence Barrier
Crowd-Q is a system of portable interlocking freestanding fence panels for crowd management. Crowd-Q is manufactured from super tough and light weight moulded polyethylene in high visibility orange. Maximum panel openings if 80mm endure small children are unable to climb through or under. Other features include stacking dimples, built-in reflective strips and low profile feet that rotate for transport or stacking. Panels link together to create continuous barricading for festivals, parades, sporting events and work sites.
Portable Pit Surround
Removable Bollards In-ground Cam-Lok
Retractable Bollard
Rubber Speed Cushion
Rubber Speed Cushions are made from recycled rubber. Rubber is lighter & easier to work with than asphalt & concrete, significantly reducing installation time.
Rubber pieces can pulled up & moved without being destroyed. This is convenient for municipalities who want to insttute temporary measures to test an area or permanently control traffic speed. Long lasting & cost-efficient, sold as a kit or individual sections if a section is damaged & needs replacing, supplied complete with fixings.
Speed Hump Heavy Duty Steel Slo-Motion
Steel speed humps designed for heavy duty use in transport depots, factories and terminals. Ideal for truck and bus traffic
Stainless Steel Convex Mirrors
Stainless steel safety mirrors are extremely durable over long term installations and are designed for outdoor use in areas that are known for vandalism or high weather conditions such as airports, railway stations, prisons and public places. Post mount brackets and fixings are supplied for easy installation to walls or posts.
Storefront Crash Prevention Bollard
The Linebacker SC is a freestanding storefront crash prevention bollard for use where maximum pedestrian safety is required. Designed to be installed as a protective device between the storefront parking spaces and pedestrian walkway to provide customer safety at petrol stations and convenience stores etc.
The SC has a solid hardened 50mm diameter core at its centre with a 90mm diameter x 5mm thick outer casing.
Installation is by core drilling 150mm into reinforced concrete. With no tripping hazards, it is ideal for use around pedestrians. As it is core drilled into the surface, it can be removed when necessary for access to equipment that may require periodic servicing or maintenance.
Tee-Lok Removable Bollards – Surface Mount
Surface mount removable bollards are ideal for installation where core drilling or slab penetration is not permitted. Tee-lok bollards are designed with an internal locking system that is activated by a T-handle key unique to this model.
Truck Wheel Stop
Designed to withstand the weight of heavy vehicles and machinery when driving into parking bays. Manufactured from 5mm heavy wall steel tube and hot dip galvanised. Recommended for installation into concrete surfaces only. Fixings included.
Warning Tactile Round
Individual discrete tactiles are available in 316 stainless steel or durable polyurethane. No messy adhesives necessary just drill and press the step into the mounting hole. Composite tactiles are manufactured from 316 stainless steel with a carborundum insert. Simply drill and press fit for a high end look with maximum slip resistance.
Wheel Chocks – Urethane
Wheel chocks manufactured from moulded urethane in bright orange colour are suitable for stopping vehicles, trucks, trailers and caravans from moving when not in use. Ideal for transport companies, mine sites and caravan owners.