- Victoria Australia
- 1300 807 525
- sales@trafficsafety.com.au
- Victoria Australia
- 1300 807 525
- sales@trafficsafety.com.au
Heavy Duty Steel Square Bollards
These square fixed bollards are available as surface mount or in-ground & are designed for traffic control situations or property & asset protection. Manufactured from heavy wall mild steel with a cast aluminium cap.
The bollards are available as hot dip galvanised only, hot dipped galvanised & powder coated Safety Yellow as standard or hot dipped galvanised & custom powder coated.
Surface mount bollards supplied with fixings & in-ground bollards have welded anchor bars.
- Ideal for home use to protect expensive power banks and EV charging stations
Height Bar
Suspended height restriction bar with hanger assemblies and chains
Minimise the risk of damaging vehicles and property caused by oversize vehicles entering areas of restricted height by installing suspended Height Bars.
Height bars are available in a range of standard lengths from 2 metres all the way up to 6 metres. Each height bar is supplied with the necessary chain suspension kits and “LOW CLEARANCE” text, with your specified height in Black lettering on a White vinyl background.
Use height bars at locations where vehicles first enter an undercover area or encounter an overhead obstruction, where the clearance in either case is: (i) 3 metres or less if only cars or light vans are likely to use the facility or (ii) 4.6 metres or less in all other areas.
Holding Rails, Target Boards and Access Bollards
Holding Rails & Target Boards
Designed for use at pedestrian and cyclist crossings to allow the user to hold on to or rest against while waiting for traffic conditions to change. They are hot dip galvanised prior to being finished with a Yellow powder coat. They come complete with Class 1 Red/White reflective bands. Holding rails are available in two designs, rail only or rail with target board. Target boards are used where a holding rail is mounted at right angles to a path. In-ground sleeves with gibb keys are available in either core drilled or new concrete models.
Access Bollards
The prevention of illegal vehicle access is critical to avoiding damage to the pathways and lightweight bridge structures, particularly when they have been designed only for bicycle and pedestrian use. The bollards are all 140mm in diameter and 1050mm tall in either surface mount, below ground or removable designs with locking sleeves. They are hot dip galvanised, prior to being finished with a Yellow powder coat, and come complete with Class 1Red/White reflective bands.
Injection Moulded Wheel Chock – Small
Wheel chock manufactured from injection moulded plastic stops cars, trailers and caravans from moving when parked. Suitable for business and personal use, these wheel chocks take up little storage room in your vehicle.
Light Duty Pedestrian Rail
ER-Rail is a flexible and economical warehouse safety barrier that is an ideal attractive and practical solution designed to control the movement of pedestrians. This post and rail system consists of 80 x 30mm aluminium rails in 2, 3 or 6 metre lengths that can be cut to any size with a power saw fitted with an aluminium cutting blade.
Rails are sold separately with optional surface mount (fixings supplied) or below ground posts, brackets and accessories available to allow for post and wall mounted installation. Designed to comply to AS 1657:2013 for balustrades and handrails when installed using ER-Rail mounting brackets.
One-Way Access Spikes
The Blade Runner one way access control consist of either a 1,000mm or 500mm heavy duty steel modules & steel end caps.
Each module has independently retracting teeth, when a vehicle approaches from the correct direction the teeth simply retract allowing the vehicle to pass freely, when approached from an unauthorised direction the teeth lock up denying access and risking almost certain tyre damage.
Key features of the one way access spikes include high visibility lime green powder coat finish and an ultra low profile construction to ensure adequate vehicle clearance. The one way access control system has been designed to provide a soft approach for vehicles due to its low ramp angle and reduced height. These same features also eliminate much of the noise commonly associated with older style products.
Six fixing points per metre (4 per 500mm module), heavy steel construction, steel end caps and revolutionary new spring design ensure a long service life with low maintenance.
WARNING: - Always check with your local authority or controlling body to ensure one way access spikes are allowable in your situation (this is the end users responsibility). One way access spikes MUST always be installed with an awareness sign kit. One way access spikes should always be placed clear of intersections and curved roadways. Failure to heed these warnings will void all warranties.
Parking Space Protectors
Collapsible parking space protectors are used in private and commercial car parks to stop unauthorised vehicles from occupying a parking spot or entering prohibited areas.
Reflective Traffic Cones
Reflective traffic cones are manufactured from U.V. stabilised fluorescent orange flexible plastic materials and come with a plastic or rubber base. They are widely used for road works, schools, civil engineering and car parks and are ideal for a range of pedestrian safety and vehicle control uses.
