- Victoria Australia
- 1300 807 525
- sales@trafficsafety.com.au
- Victoria Australia
- 1300 807 525
- sales@trafficsafety.com.au
Disability Wheel Stop
Designed to comply with AS2890.1:2004 & coloured Blue specifically to highlight Disabled parking bays, the compliance wheel stop is manufactured from high-tech Linear Low Density Polyethylene. (LLDPE)
This one-piece wheel stop will not fade, rot or rust & comes complete with matching blanking plugs to conceal the fixings. Optional signage available to provide added visibility if required.
Dock-Safe-Q
Dock-Safe-Q is a lightweight rapid deployment temporary safety barrier system to prevent people tripping or falling from elevated loading docks.
Dock-Safe-Q is comprised of two parts (ordered separately) which can be used in conjunction or separately.
- The Dock-Safe receiver is a moulded rubber block that is mounted directly to the face of the loading dock (fixings supplied), this receiver can act as a dock bumper only or as dock bumper & panel holder.
- The Dock-Safe-Q-panel simply drops into sockets in the receiver, or panels can be used without receiver by core drilling a 50mm diametre hole into the floor to receive the panel posts.
Panels manufactured from blow moulded polyethylene, 2,130mm long x 900mm high, receivers are moulded rubber.
Downpipe Protectors
These bull dog Downpipe Protectors have been designed to guard cables and exposed pipes from the risk of damage caused by maneuvering forklifts and vehicle impacts. Pipe guards defend your vehicle or forklift as well as your downpipes, without intruding on available car parking space. Manufactured from mild steel, the guards are hot dipped galvanised & powder coated Yellow for high visibility & include 6 x pre-drilled mount holes 10mm diameter. Available to suit 100mm or 200mm pipes or cables.
Economy Steel Round Bollard
- Ideal for home use to protect expensive power banks and EV charging station bollard
Foam-Filled Column Cushion
Column Cushion, also known as a Column Protector, helps prevent damage to structural columns by surrounding them with a foam-filled polyethylene cushion. Available in a range of standard sizes that fit most square or round columns, the two blow-moulded hard shells can be installed in seconds without the need for any tools, and removed at any time for cleaning or maintenance.
Unlike most moulded column protectors which simply contain air, Column Cushion is filled with injectable expanding foam. This foam dramatically increases impact protection and helps the Column Cushion return to shape after impact. So while other column protectors may look similar, ONLY Column Cushion by Barrier Group has the added advantage of foam fill.
Product Features:
- a foam-filled polyethylene cushion.
- Moulded from high impact polyethylene in bright Yellow with contrasting Black straps.
- Can be used singularly or stacked in pairs.
- U.V. stabilised for indoor or outdoor use.
- Surprisingly cost-effective and maintenance free.
- Extremely versatile and durable.
- Chemical resistant, non-conductive and waterproof.
Fold Down Bollard
Gal Plus
For around the same price as powder coated models, you can install hot dip galvanised steel bollards fitted with Skinz bollard covers reducing the need for paint and future maintenance costs.
Bollards fitted with plastic sleeves are ideal for congested car parks as they can reduce the impact damage caused to vehicles and bollards when they come into contact with each other. Likewise in shopping centres, maintenance to damaged bollards caused by shopping trolleys can be virtually eliminated.
Skinz sleeves have three grooves designed into the bollard cover that allows reflective tape to lay flush against the sleeve, greatly reducing the chances of the tape peeling.
Galvanised Bike Rail – Below Ground 400mm
Galvanised Hoop Bollards Heavy Duty Steel
Hoop Bollards are intended to safeguard the perimeters of areas subjected to hazardous factory traffic as well as vehicle impacts. The Hoops are ideal for both external and internal spaces ensuring installations throughout a variety of areas throughout the premises.
Product Features:
- Rolled out of a single piece of heavy wall pipe
- Sold in 600 or 900mm wide models
- Three mounting options; fixed surface mount, fixed in-ground or even removable in-ground
- Hot dip galvanised
Heavy Duty Bump Rail
Bump rail is high strength aluminium extrusion that weighs less than half the equivalent steel profile per lineal metre.
When faced with the curved side to an impact Bump Rail is designed for use as a truck or machinery stop, the rounded top & curved face offering a higher contact point for the vehicle wheels.
At 2,400mm long it is the right width for most trucks, fixing points at either end have been strategically positioned at the point of impact 275mm apart to ensure maximum hold down. Also available is a galvanised steel slip joiner for joining rails together if required.
Supplied pre-drilled & powder coated Yellow.
Heavy Duty Pedestrian Rail
PR-Rail is an aluminium railing system designed for use in car parks, factories, shopping centres or anywhere vehicles and pedestrians need to be segregated.
The modular design ensures barriers can be quickly erected with a minimum of disruption.
Rails are sold separately with optional surface mount (fixings supplied) or below ground posts, brackets and accessories available to allow for post and wall mounted installation.
Industrial gates and rails are designed to comply to AS 1657:2013 for balustrades and handrails when installed using PR-Rail mounting brackets.
Heavy Duty Steel Round Bollards
Heavy duty steel bollards with wall thickness ranging from 5 tp 6.4mm for tough environments. All our steel bollards come hot dip galvanised and are available with or without powder coated surface finishes.
Cast aluminium caps and reflective bands are included while optional chain ring kits are available to purchase separately.
- Also the perfect bollard at home to protect expensive power banks and EV charging stations