- Victoria Australia
- 1300 807 525
- sales@trafficsafety.com.au
- Victoria Australia
- 1300 807 525
- sales@trafficsafety.com.au
Dock-Safe-Q
Dock-Safe-Q is a lightweight rapid deployment temporary safety barrier system to prevent people tripping or falling from elevated loading docks.
Dock-Safe-Q is comprised of two parts (ordered separately) which can be used in conjunction or separately.
- The Dock-Safe receiver is a moulded rubber block that is mounted directly to the face of the loading dock (fixings supplied), this receiver can act as a dock bumper only or as dock bumper & panel holder.
- The Dock-Safe-Q-panel simply drops into sockets in the receiver, or panels can be used without receiver by core drilling a 50mm diametre hole into the floor to receive the panel posts.
Panels manufactured from blow moulded polyethylene, 2,130mm long x 900mm high, receivers are moulded rubber.
Downpipe Protectors
These bull dog Downpipe Protectors have been designed to guard cables and exposed pipes from the risk of damage caused by maneuvering forklifts and vehicle impacts. Pipe guards defend your vehicle or forklift as well as your downpipes, without intruding on available car parking space. Manufactured from mild steel, the guards are hot dipped galvanised & powder coated Yellow for high visibility & include 6 x pre-drilled mount holes 10mm diameter. Available to suit 100mm or 200mm pipes or cables.
Economy Steel Round Bollard
- Ideal for home use to protect expensive power banks and EV charging station bollard
Foam-Filled Column Cushion
Column Cushion, also known as a Column Protector, helps prevent damage to structural columns by surrounding them with a foam-filled polyethylene cushion. Available in a range of standard sizes that fit most square or round columns, the two blow-moulded hard shells can be installed in seconds without the need for any tools, and removed at any time for cleaning or maintenance.
Unlike most moulded column protectors which simply contain air, Column Cushion is filled with injectable expanding foam. This foam dramatically increases impact protection and helps the Column Cushion return to shape after impact. So while other column protectors may look similar, ONLY Column Cushion by Barrier Group has the added advantage of foam fill.
Product Features:
- a foam-filled polyethylene cushion.
- Moulded from high impact polyethylene in bright Yellow with contrasting Black straps.
- Can be used singularly or stacked in pairs.
- U.V. stabilised for indoor or outdoor use.
- Surprisingly cost-effective and maintenance free.
- Extremely versatile and durable.
- Chemical resistant, non-conductive and waterproof.
Fold Down Bollard
Galvanised Bike Rail – Below Ground 400mm
Heavy Duty Bump Rail
Bump rail is high strength aluminium extrusion that weighs less than half the equivalent steel profile per lineal metre.
When faced with the curved side to an impact Bump Rail is designed for use as a truck or machinery stop, the rounded top & curved face offering a higher contact point for the vehicle wheels.
At 2,400mm long it is the right width for most trucks, fixing points at either end have been strategically positioned at the point of impact 275mm apart to ensure maximum hold down. Also available is a galvanised steel slip joiner for joining rails together if required.
Supplied pre-drilled & powder coated Yellow.
Heavy Duty Steel Round Bollards
Heavy duty steel bollards with wall thickness ranging from 5 tp 6.4mm for tough environments. All our steel bollards come hot dip galvanised and are available with or without powder coated surface finishes.
Cast aluminium caps and reflective bands are included while optional chain ring kits are available to purchase separately.
- Also the perfect bollard at home to protect expensive power banks and EV charging stations
Heavy Duty Steel Square Bollards
These square fixed bollards are available as surface mount or in-ground & are designed for traffic control situations or property & asset protection. Manufactured from heavy wall mild steel with a cast aluminium cap.
The bollards are available as hot dip galvanised only, hot dipped galvanised & powder coated Safety Yellow as standard or hot dipped galvanised & custom powder coated.
Surface mount bollards supplied with fixings & in-ground bollards have welded anchor bars.
- Ideal for home use to protect expensive power banks and EV charging stations
Height Bar
Suspended height restriction bar with hanger assemblies and chains
Minimise the risk of damaging vehicles and property caused by oversize vehicles entering areas of restricted height by installing suspended Height Bars.
Height bars are available in a range of standard lengths from 2 metres all the way up to 6 metres. Each height bar is supplied with the necessary chain suspension kits and “LOW CLEARANCE” text, with your specified height in Black lettering on a White vinyl background.
Use height bars at locations where vehicles first enter an undercover area or encounter an overhead obstruction, where the clearance in either case is: (i) 3 metres or less if only cars or light vans are likely to use the facility or (ii) 4.6 metres or less in all other areas.
Holding Rails, Target Boards and Access Bollards
Holding Rails & Target Boards
Designed for use at pedestrian and cyclist crossings to allow the user to hold on to or rest against while waiting for traffic conditions to change. They are hot dip galvanised prior to being finished with a Yellow powder coat. They come complete with Class 1 Red/White reflective bands. Holding rails are available in two designs, rail only or rail with target board. Target boards are used where a holding rail is mounted at right angles to a path. In-ground sleeves with gibb keys are available in either core drilled or new concrete models.
Access Bollards
The prevention of illegal vehicle access is critical to avoiding damage to the pathways and lightweight bridge structures, particularly when they have been designed only for bicycle and pedestrian use. The bollards are all 140mm in diameter and 1050mm tall in either surface mount, below ground or removable designs with locking sleeves. They are hot dip galvanised, prior to being finished with a Yellow powder coat, and come complete with Class 1Red/White reflective bands.
Injection Moulded Wheel Chock – Small
Wheel chock manufactured from injection moulded plastic stops cars, trailers and caravans from moving when parked. Suitable for business and personal use, these wheel chocks take up little storage room in your vehicle.