Car Park Signs
Class 1 reflective aluminium & non reflective Polypropylene signs to direct the flow of vehicle traffic in car parks. The class 1 reflective aluminium signs in this range are intended for private car park or off street use. Before using these signs on public road ways please ensure your selection meets the standards and requirements applicable to your state or territory.
Galvanised steel posts, sign mounting brackets & post mounting sleeves also available, post mounting sleeves are available in surface mount, in-ground or core drilled & are supplied with Gibb key.
Co-Pilot Post & Base
Got a wind problem? Let the Co-Pilot take care of it. The biggest problem with long reach belt barriers used outside is wind. With its 20kg cast iron base and stainless steel post, Co-Pilot provides stability and mobility, while the 75mm non-marking polyurethane wheels and pozi-grip handle make positioning as simple as tilt and walk.
If necessary, stability can be increased even further through the addition of optional 10kg base weights, Up to two base weights at 10kgs each can be added bringing the total weight of the Co-pilot base up to 40kgs. Base weights can be added or removed at any time without the need for tools.
Compliance Wheel Stop
Created to comply with AS/NZS 2890.1:2004 and produced from high tech Linear Low Density Polyethylene (LLDPE) with sustainability in mind, Compliance Wheel Stop is the clear green choice.
Compliance can be obtained in four standard U.V. stabilised colours - Yellow for increased pedestrian safety and visibility, Blue for highlighting handicapped parking areas, Grey for a concrete-like finish and an economical recycled Black.
Four fixing points allow for exceptional hold-down strength. All come supplied with blanking plugs.
Add a fixing kit to your order from our range of choices which give for a variety of installation demands.
Product Features:
- Environmentally friendly Linear Low Density Polyethylene (LLDPE) provides a solid U.V. stabilised colour
- Easy for one person to install weighing in at 5.5kg
- Fixing systems offered for installation onto concrete, bitumen or asphalt
- Blanking plugs included. Fixings sold separately
Directional Tactile Bar
Raised flat-top tactile bars are used to assist visually impaired individuals of the direction in which the path travels. While used for directional assistance for pedestrian travel, they also provide guidance around obstacles like street furniture in high foot traffic areas.
Disability Wheel Stop
Designed to comply with AS2890.1:2004 & coloured Blue specifically to highlight Disabled parking bays, the compliance wheel stop is manufactured from high-tech Linear Low Density Polyethylene. (LLDPE)
This one-piece wheel stop will not fade, rot or rust & comes complete with matching blanking plugs to conceal the fixings. Optional signage available to provide added visibility if required.
Dock-Safe-Q
Dock-Safe-Q is a lightweight rapid deployment temporary safety barrier system to prevent people tripping or falling from elevated loading docks.
Dock-Safe-Q is comprised of two parts (ordered separately) which can be used in conjunction or separately.
- The Dock-Safe receiver is a moulded rubber block that is mounted directly to the face of the loading dock (fixings supplied), this receiver can act as a dock bumper only or as dock bumper & panel holder.
- The Dock-Safe-Q-panel simply drops into sockets in the receiver, or panels can be used without receiver by core drilling a 50mm diametre hole into the floor to receive the panel posts.
Panels manufactured from blow moulded polyethylene, 2,130mm long x 900mm high, receivers are moulded rubber.
Dome Convex Mirrors
Dome convex safety mirrors are an economical alternative to other expensive models on the market and come in models that provide 90 degree, 180 degree and 360 degree views. They are widely used in convenience stores, milkbars and shops.
- Recommended for indoor use only.
Double Belt Posts Portable
Neata double belt posts are stylish and modern addition to any public place like Airports, Hotels, Cinemas, Retail Stores and more for managing queue control and crowd flow.
Manufactured from economy stainless steel, choose from three base designs in our Midline, Stackable or Roller retractable barrier models. All posts are 63mm in diameter and come with 3 metre belts in a choice of three standard colours or five optional printed belts. All belt cassettes feature built-in brakes and self-locking clips.
Product Features:
- Replacement posts & cassettes available for all belt posts.
- Smooth receiver clips to avoid snagging.
- High quality three metre belt.
- Durable self-locking clip.
- Available in six standard colours.
- Built in belt brake controls retraction rate when released.
Downpipe Protectors
These bull dog Downpipe Protectors have been designed to guard cables and exposed pipes from the risk of damage caused by maneuvering forklifts and vehicle impacts. Pipe guards defend your vehicle or forklift as well as your downpipes, without intruding on available car parking space. Manufactured from mild steel, the guards are hot dipped galvanised & powder coated Yellow for high visibility & include 6 x pre-drilled mount holes 10mm diameter. Available to suit 100mm or 200mm pipes or cables.