Pilot Hazard Lights
$38.50 inc. GST
Like all of the other components in the Pilot system, the LED solar powered hazard light utilises our unique twist-lok quick connect system to attach to the full range of posts, cones, wall and magna-mount holders.
Pilot lights are available in Red, Green, White or Amber light. When fully charged after exposure to sunlight, the lights will continue to function for many hours without the need for batteries. A built-in 3 position switch allows the selection of OFF, FLASH or STATIC modes.
The reflective band at the top increases night visibility & indicates the colour of the LED’s.
Only logged in customers who have purchased this product may leave a review.
Related products
Galvanised Hoop Bollards Heavy Duty Steel
Hoop Bollards are intended to safeguard the perimeters of areas subjected to hazardous factory traffic as well as vehicle impacts. The Hoops are ideal for both external and internal spaces ensuring installations throughout a variety of areas throughout the premises.
Product Features:
- Rolled out of a single piece of heavy wall pipe
- Sold in 600 or 900mm wide models
- Three mounting options; fixed surface mount, fixed in-ground or even removable in-ground
- Hot dip galvanised
Wheel Chocks – Urethane
Wheel chocks manufactured from moulded urethane in bright orange colour are suitable for stopping vehicles, trucks, trailers and caravans from moving when not in use. Ideal for transport companies, mine sites and caravan owners.
Wheel Chocks – Rubber
Rubber wheel chocks made from moulded recycled black rubber are available in single and double-sided designs. They are suitable for light and heavy duty vehicles such as cars, utes, caravans, buses and trucks. The portable and compact design makes storage in your vehicle easy and non-invasive.
One-Way Access Spikes
The Blade Runner one way access control consist of either a 1,000mm or 500mm heavy duty steel modules & steel end caps.
Each module has independently retracting teeth, when a vehicle approaches from the correct direction the teeth simply retract allowing the vehicle to pass freely, when approached from an unauthorised direction the teeth lock up denying access and risking almost certain tyre damage.
Key features of the one way access spikes include high visibility lime green powder coat finish and an ultra low profile construction to ensure adequate vehicle clearance. The one way access control system has been designed to provide a soft approach for vehicles due to its low ramp angle and reduced height. These same features also eliminate much of the noise commonly associated with older style products.
Six fixing points per metre (4 per 500mm module), heavy steel construction, steel end caps and revolutionary new spring design ensure a long service life with low maintenance.
WARNING: - Always check with your local authority or controlling body to ensure one way access spikes are allowable in your situation (this is the end users responsibility). One way access spikes MUST always be installed with an awareness sign kit. One way access spikes should always be placed clear of intersections and curved roadways. Failure to heed these warnings will void all warranties.
Pilot Signage
Pilot multi-post sign range, 1.4mm polypropylene, 300mm wide x 450mm high.
Pilot Telescopic Multi Post
Whatever you want it to be! The telescopic post is mounted to a mobile 20kg cast iron base that can extend 700mm from 1300mm to 2000mm or be locked anywhere between. Compatible with all Pilot accessories, Multi-Post can be configured in numerous ways using the included accessory mountings.
In outdoor or windy conditions the stability of Multi-Post can be increased through the addition of optional 10kg base weights Up to two base weights at 10kgs each can be added bringing the total weight of the Multi-Post base to 40kgs. The weights can be added or removed at anytime without the need for tools.
Reviews
There are no reviews yet.