Workplace Safety is a broad term that covers many different safety products and equipment. The number one priority of workplace safety is keeping workers, visitors and customers safe at work, and also includes protecting expensive machinery, equipment, structures, and vehicles. SafetyFind’s massive range of workplace safety products includes separation products that allow pedestrians and vehicles to safely coexist, asset protection equipment such as machinery guarding, security bollards and expandable barriers, and queue management, people separation and social distancing through retractable belt barriers, portable fencing and clearly displayed safety signage.
Shock Absorbing Bollards
Rubber Speed Cushion
Rubber Speed Cushions are made from recycled rubber. Rubber is lighter & easier to work with than asphalt & concrete, significantly reducing installation time.
Rubber pieces can pulled up & moved without being destroyed. This is convenient for municipalities who want to insttute temporary measures to test an area or permanently control traffic speed. Long lasting & cost-efficient, sold as a kit or individual sections if a section is damaged & needs replacing, supplied complete with fixings.
Expanding Barrier Freestanding Maxi
One-Way Access Spikes
The Blade Runner one way access control consist of either a 1,000mm or 500mm heavy duty steel modules & steel end caps.
Each module has independently retracting teeth, when a vehicle approaches from the correct direction the teeth simply retract allowing the vehicle to pass freely, when approached from an unauthorised direction the teeth lock up denying access and risking almost certain tyre damage.
Key features of the one way access spikes include high visibility lime green powder coat finish and an ultra low profile construction to ensure adequate vehicle clearance. The one way access control system has been designed to provide a soft approach for vehicles due to its low ramp angle and reduced height. These same features also eliminate much of the noise commonly associated with older style products.
Six fixing points per metre (4 per 500mm module), heavy steel construction, steel end caps and revolutionary new spring design ensure a long service life with low maintenance.
WARNING: - Always check with your local authority or controlling body to ensure one way access spikes are allowable in your situation (this is the end users responsibility). One way access spikes MUST always be installed with an awareness sign kit. One way access spikes should always be placed clear of intersections and curved roadways. Failure to heed these warnings will void all warranties.
Foam-Filled Column Cushion
Column Cushion, also known as a Column Protector, helps prevent damage to structural columns by surrounding them with a foam-filled polyethylene cushion. Available in a range of standard sizes that fit most square or round columns, the two blow-moulded hard shells can be installed in seconds without the need for any tools, and removed at any time for cleaning or maintenance.
Unlike most moulded column protectors which simply contain air, Column Cushion is filled with injectable expanding foam. This foam dramatically increases impact protection and helps the Column Cushion return to shape after impact. So while other column protectors may look similar, ONLY Column Cushion by Barrier Group has the added advantage of foam fill.
Product Features:
- a foam-filled polyethylene cushion.
- Moulded from high impact polyethylene in bright Yellow with contrasting Black straps.
- Can be used singularly or stacked in pairs.
- U.V. stabilised for indoor or outdoor use.
- Surprisingly cost-effective and maintenance free.
- Extremely versatile and durable.
- Chemical resistant, non-conductive and waterproof.
Removable Bollards In-ground Cam-Lok
Retractable Bollard
Height Bar
Suspended height restriction bar with hanger assemblies and chains
Minimise the risk of damaging vehicles and property caused by oversize vehicles entering areas of restricted height by installing suspended Height Bars.
Height bars are available in a range of standard lengths from 2 metres all the way up to 6 metres. Each height bar is supplied with the necessary chain suspension kits and “LOW CLEARANCE” text, with your specified height in Black lettering on a White vinyl background.
Use height bars at locations where vehicles first enter an undercover area or encounter an overhead obstruction, where the clearance in either case is: (i) 3 metres or less if only cars or light vans are likely to use the facility or (ii) 4.6 metres or less in all other areas.
Heavy Duty Steel Round Bollards
Heavy duty steel bollards with wall thickness ranging from 5 tp 6.4mm for tough environments. All our steel bollards come hot dip galvanised and are available with or without powder coated surface finishes.
Cast aluminium caps and reflective bands are included while optional chain ring kits are available to purchase separately.
- Also the perfect bollard at home to protect expensive power banks and EV charging stations
Stainless Steel Convex Mirrors
Stainless steel safety mirrors are extremely durable over long term installations and are designed for outdoor use in areas that are known for vandalism or high weather conditions such as airports, railway stations, prisons and public places. Post mount brackets and fixings are supplied for easy installation to walls or posts.
Holding Rails, Target Boards and Access Bollards
Holding Rails & Target Boards
Designed for use at pedestrian and cyclist crossings to allow the user to hold on to or rest against while waiting for traffic conditions to change. They are hot dip galvanised prior to being finished with a Yellow powder coat. They come complete with Class 1 Red/White reflective bands. Holding rails are available in two designs, rail only or rail with target board. Target boards are used where a holding rail is mounted at right angles to a path. In-ground sleeves with gibb keys are available in either core drilled or new concrete models.
Access Bollards
The prevention of illegal vehicle access is critical to avoiding damage to the pathways and lightweight bridge structures, particularly when they have been designed only for bicycle and pedestrian use. The bollards are all 140mm in diameter and 1050mm tall in either surface mount, below ground or removable designs with locking sleeves. They are hot dip galvanised, prior to being finished with a Yellow powder coat, and come complete with Class 1Red/White reflective bands.
Bicycle Path Bollards & Rails
Traffic Cone – 1000mm Reflective – Yellow – Value Pack of 10
Traffic Cone - 1000mm Reflective - Yellow - Value Pack of 10
Cam-Lok Removable Bollards – Surface Mount
Surface mount removable bollards are ideal for installation where core drilling or slab penetration is not permitted. Cam-lok bollards are designed with a high quality 'bi-lock' removable core lock mechanism that is supplied with two security registered keys per bollard order.
Expanding Barrier Utility Freestanding
- Three sides that expand out to 2.6 metres
- Width when closed 360mm
- Steps up to 300mm for changing floor levels
- Designed for cordoning off small spaces
- Wall receiver and sign brackets included
- 990mm high, 1090mm high when used with optional castors
Event Fence Crowd Control Barrier
Pilot Telescopic Multi Post
Whatever you want it to be! The telescopic post is mounted to a mobile 20kg cast iron base that can extend 700mm from 1300mm to 2000mm or be locked anywhere between. Compatible with all Pilot accessories, Multi-Post can be configured in numerous ways using the included accessory mountings.
In outdoor or windy conditions the stability of Multi-Post can be increased through the addition of optional 10kg base weights Up to two base weights at 10kgs each can be added bringing the total weight of the Multi-Post base to 40kgs. The weights can be added or removed at anytime without the need for tools.
Truck Wheel Stop
Designed to withstand the weight of heavy vehicles and machinery when driving into parking bays. Manufactured from 5mm heavy wall steel tube and hot dip galvanised. Recommended for installation into concrete surfaces only. Fixings included.
Portable Crowd-Q Plastic Fence Barrier
Crowd-Q Portable Plastic Fence panel. 2130mm x 1000mm x 50mm. 14kg.
Heavy Duty Steel Square Bollards
These square fixed bollards are available as surface mount or in-ground & are designed for traffic control situations or property & asset protection. Manufactured from heavy wall mild steel with a cast aluminium cap.
The bollards are available as hot dip galvanised only, hot dipped galvanised & powder coated Safety Yellow as standard or hot dipped galvanised & custom powder coated.
Surface mount bollards supplied with fixings & in-ground bollards have welded anchor bars.
- Ideal for home use to protect expensive power banks and EV charging stations
Co-Pilot Post & Base
Got a wind problem? Let the Co-Pilot take care of it. The biggest problem with long reach belt barriers used outside is wind. With its 20kg cast iron base and stainless steel post, Co-Pilot provides stability and mobility, while the 75mm non-marking polyurethane wheels and pozi-grip handle make positioning as simple as tilt and walk.
If necessary, stability can be increased even further through the addition of optional 10kg base weights, Up to two base weights at 10kgs each can be added bringing the total weight of the Co-pilot base up to 40kgs. Base weights can be added or removed at any time without the need for tools.
Cable Protectors – Plastic
Plastic cable protectors come in Two, Three or Five channel design with a polyurethane and rubber construction. They are ideal for festivals, public events and workplaces. It has interlocking ends that allows for cable and hose protection across short or long distances.
Post Pallet 1050mm Inside with 1200mm Posts
Dome Convex Mirrors
Dome convex safety mirrors are an economical alternative to other expensive models on the market and come in models that provide 90 degree, 180 degree and 360 degree views. They are widely used in convenience stores, milkbars and shops.
- Recommended for indoor use only.