Workplace Safety is a broad term that covers many different safety products and equipment. The number one priority of workplace safety is keeping workers, visitors and customers safe at work, and also includes protecting expensive machinery, equipment, structures, and vehicles. SafetyFind’s massive range of workplace safety products includes separation products that allow pedestrians and vehicles to safely coexist, asset protection equipment such as machinery guarding, security bollards and expandable barriers, and queue management, people separation and social distancing through retractable belt barriers, portable fencing and clearly displayed safety signage.
Aluminium Trolley Ramp 900 x 1025mm
The ATR900 is a robust trolley ramp manufactured from 6mm thick aluminium textured floor plate with a total weight of approximately 15kgs. It is designed for pedestrian or hand trolley use with a load limit of 300kgs. With the ability to bridge changes in height up to 200mm, it is ideal around loading docks. Supplied with two stainless steel locating pins that secure the ramp in place, and convenient built-in carry handles to facilitate handling by one person.
Bicycle Path Bollards & Rails
Bike Rack Schoolies
Expanding Barrier Freestanding Maxi
Foam-Filled Column Cushion
Column Cushion, also known as a Column Protector, helps prevent damage to structural columns by surrounding them with a foam-filled polyethylene cushion. Available in a range of standard sizes that fit most square or round columns, the two blow-moulded hard shells can be installed in seconds without the need for any tools, and removed at any time for cleaning or maintenance.
Unlike most moulded column protectors which simply contain air, Column Cushion is filled with injectable expanding foam. This foam dramatically increases impact protection and helps the Column Cushion return to shape after impact. So while other column protectors may look similar, ONLY Column Cushion by Barrier Group has the added advantage of foam fill.
Product Features:
- a foam-filled polyethylene cushion.
- Moulded from high impact polyethylene in bright Yellow with contrasting Black straps.
- Can be used singularly or stacked in pairs.
- U.V. stabilised for indoor or outdoor use.
- Surprisingly cost-effective and maintenance free.
- Extremely versatile and durable.
- Chemical resistant, non-conductive and waterproof.
Heavy Duty Bump Rail
Bump rail is high strength aluminium extrusion that weighs less than half the equivalent steel profile per lineal metre.
When faced with the curved side to an impact Bump Rail is designed for use as a truck or machinery stop, the rounded top & curved face offering a higher contact point for the vehicle wheels.
At 2,400mm long it is the right width for most trucks, fixing points at either end have been strategically positioned at the point of impact 275mm apart to ensure maximum hold down. Also available is a galvanised steel slip joiner for joining rails together if required.
Supplied pre-drilled & powder coated Yellow.
Heavy Duty Steel Round Bollards
Heavy duty steel bollards with wall thickness ranging from 5 tp 6.4mm for tough environments. All our steel bollards come hot dip galvanised and are available with or without powder coated surface finishes.
Cast aluminium caps and reflective bands are included while optional chain ring kits are available to purchase separately.
- Also the perfect bollard at home to protect expensive power banks and EV charging stations
Height Bar
Suspended height restriction bar with hanger assemblies and chains
Minimise the risk of damaging vehicles and property caused by oversize vehicles entering areas of restricted height by installing suspended Height Bars.
Height bars are available in a range of standard lengths from 2 metres all the way up to 6 metres. Each height bar is supplied with the necessary chain suspension kits and “LOW CLEARANCE” text, with your specified height in Black lettering on a White vinyl background.
Use height bars at locations where vehicles first enter an undercover area or encounter an overhead obstruction, where the clearance in either case is: (i) 3 metres or less if only cars or light vans are likely to use the facility or (ii) 4.6 metres or less in all other areas.
Holding Rails, Target Boards and Access Bollards
Holding Rails & Target Boards
Designed for use at pedestrian and cyclist crossings to allow the user to hold on to or rest against while waiting for traffic conditions to change. They are hot dip galvanised prior to being finished with a Yellow powder coat. They come complete with Class 1 Red/White reflective bands. Holding rails are available in two designs, rail only or rail with target board. Target boards are used where a holding rail is mounted at right angles to a path. In-ground sleeves with gibb keys are available in either core drilled or new concrete models.
Access Bollards
The prevention of illegal vehicle access is critical to avoiding damage to the pathways and lightweight bridge structures, particularly when they have been designed only for bicycle and pedestrian use. The bollards are all 140mm in diameter and 1050mm tall in either surface mount, below ground or removable designs with locking sleeves. They are hot dip galvanised, prior to being finished with a Yellow powder coat, and come complete with Class 1Red/White reflective bands.