Fibre Glass Stair Nosing
FRP stair nosing is manufactured from safety yellow fibreglass reinforced composite plastic that features a tough anti slip grit. Ideal for public spaces and workplaces to eliminate the risk of slip accidents. Suitable for jetties, piers, ferries, factories, warehouses, train stations and public stairways.
Foam-Filled Column Cushion
Column Cushion, also known as a Column Protector, helps prevent damage to structural columns by surrounding them with a foam-filled polyethylene cushion. Available in a range of standard sizes that fit most square or round columns, the two blow-moulded hard shells can be installed in seconds without the need for any tools, and removed at any time for cleaning or maintenance.
Unlike most moulded column protectors which simply contain air, Column Cushion is filled with injectable expanding foam. This foam dramatically increases impact protection and helps the Column Cushion return to shape after impact. So while other column protectors may look similar, ONLY Column Cushion by Barrier Group has the added advantage of foam fill.
Product Features:
- a foam-filled polyethylene cushion.
- Moulded from high impact polyethylene in bright Yellow with contrasting Black straps.
- Can be used singularly or stacked in pairs.
- U.V. stabilised for indoor or outdoor use.
- Surprisingly cost-effective and maintenance free.
- Extremely versatile and durable.
- Chemical resistant, non-conductive and waterproof.
Galvanised Bike Rail – Below Ground 400mm
Heavy Duty Bump Rail
Bump rail is high strength aluminium extrusion that weighs less than half the equivalent steel profile per lineal metre.
When faced with the curved side to an impact Bump Rail is designed for use as a truck or machinery stop, the rounded top & curved face offering a higher contact point for the vehicle wheels.
At 2,400mm long it is the right width for most trucks, fixing points at either end have been strategically positioned at the point of impact 275mm apart to ensure maximum hold down. Also available is a galvanised steel slip joiner for joining rails together if required.
Supplied pre-drilled & powder coated Yellow.
Height Bar
Suspended height restriction bar with hanger assemblies and chains
Minimise the risk of damaging vehicles and property caused by oversize vehicles entering areas of restricted height by installing suspended Height Bars.
Height bars are available in a range of standard lengths from 2 metres all the way up to 6 metres. Each height bar is supplied with the necessary chain suspension kits and “LOW CLEARANCE” text, with your specified height in Black lettering on a White vinyl background.
Use height bars at locations where vehicles first enter an undercover area or encounter an overhead obstruction, where the clearance in either case is: (i) 3 metres or less if only cars or light vans are likely to use the facility or (ii) 4.6 metres or less in all other areas.
Hi-Vis Convex Mirrors
Hi-vis convex safety mirrors come in round and roundtangular models and feature an unbreakable polycarbonate face with a premium class 1 reflective surface. Brackets and fixings are supplied for easy installation to walls or posts.
Holding Rails, Target Boards and Access Bollards
Holding Rails & Target Boards
Designed for use at pedestrian and cyclist crossings to allow the user to hold on to or rest against while waiting for traffic conditions to change. They are hot dip galvanised prior to being finished with a Yellow powder coat. They come complete with Class 1 Red/White reflective bands. Holding rails are available in two designs, rail only or rail with target board. Target boards are used where a holding rail is mounted at right angles to a path. In-ground sleeves with gibb keys are available in either core drilled or new concrete models.
Access Bollards
The prevention of illegal vehicle access is critical to avoiding damage to the pathways and lightweight bridge structures, particularly when they have been designed only for bicycle and pedestrian use. The bollards are all 140mm in diameter and 1050mm tall in either surface mount, below ground or removable designs with locking sleeves. They are hot dip galvanised, prior to being finished with a Yellow powder coat, and come complete with Class 1Red/White reflective bands.
Indoor Convex Mirrors
Indoor convex mirrors have an unbreakable polycarbonate face and are used to monitor pedestrian traffic and vehicle movement in retail stores, warehouses, factories and car parks. Brackets and fixings are supplied for easy installation to walls or posts.
Injection Moulded Wheel Chock – Small
Wheel chock manufactured from injection moulded plastic stops cars, trailers and caravans from moving when parked. Suitable for business and personal use, these wheel chocks take up little storage room in your vehicle.
Kerb Ramp – Black & Hi-Vis Yellow
Kerb ramps are a portable black rubber ramp that allow cars, caravans, utes and trucks to easily drive over kerbs and steps. They are ideal for construction sites, distribution centres, emergency crews and caravan owners.
Kerb Ramp Rubber
Our best-selling kerb ramps are made from durable recycled black rubber and are designed to improve car, truck, forklift and hand trolley access over changes in ground levels like kerbs (curbs) and steps.
The diamond tread helps provide a non-slip/skid surface on the kerb ramp, and the portable and compact design makes it easy to store in your vehicle when not in use.
Midline Economy Hook Post
Neata Wall Receiver Locking Clip
Neata Wall Receiver Locking Clip
Non-Slip Rubber Floor Mats
This popular non-slip rubber floor mat is manufactured from hard-wearing and high-quality rubber to provide an anti-slip and anti-fatigue surface. The red rubber version is also oil resistant. These non-slip mats are frequently used in workplaces where staff are conducting tasks on their feet for long periods of time, and are ideal for use in commercial kitchens, warehouses, supermarkets and shopping centres, and in accessibility environments.
One-Way Access Spikes
The Blade Runner one way access control consist of either a 1,000mm or 500mm heavy duty steel modules & steel end caps.
Each module has independently retracting teeth, when a vehicle approaches from the correct direction the teeth simply retract allowing the vehicle to pass freely, when approached from an unauthorised direction the teeth lock up denying access and risking almost certain tyre damage.
Key features of the one way access spikes include high visibility lime green powder coat finish and an ultra low profile construction to ensure adequate vehicle clearance. The one way access control system has been designed to provide a soft approach for vehicles due to its low ramp angle and reduced height. These same features also eliminate much of the noise commonly associated with older style products.
Six fixing points per metre (4 per 500mm module), heavy steel construction, steel end caps and revolutionary new spring design ensure a long service life with low maintenance.
WARNING: - Always check with your local authority or controlling body to ensure one way access spikes are allowable in your situation (this is the end users responsibility). One way access spikes MUST always be installed with an awareness sign kit. One way access spikes should always be placed clear of intersections and curved roadways. Failure to heed these warnings will void all warranties.
Outdoor Convex Mirrors
Outdoor convex mirrors feature a weatherproof polycarbonate face and are typically mounted to walls or posts for installation. Safety mirrors are ideal for road and pedestrian traffic monitoring in distribution centres, parking complexes and car parks.
Parking Space Protectors
Collapsible parking space protectors are used in private and commercial car parks to stop unauthorised vehicles from occupying a parking spot or entering prohibited areas.
Pilot High 5 Hook Accessory
Pilot High 5 Hook Accessory