Light Duty Pedestrian Rail
ER-Rail is a flexible and economical warehouse safety barrier that is an ideal attractive and practical solution designed to control the movement of pedestrians. This post and rail system consists of 80 x 30mm aluminium rails in 2, 3 or 6 metre lengths that can be cut to any size with a power saw fitted with an aluminium cutting blade.
Rails are sold separately with optional surface mount (fixings supplied) or below ground posts, brackets and accessories available to allow for post and wall mounted installation. Designed to comply to AS 1657:2013 for balustrades and handrails when installed using ER-Rail mounting brackets.
Magnetic Bollard
Gal Plus
For around the same price as powder coated models, you can install hot dip galvanised steel bollards fitted with Skinz bollard covers reducing the need for paint and future maintenance costs.
Bollards fitted with plastic sleeves are ideal for congested car parks as they can reduce the impact damage caused to vehicles and bollards when they come into contact with each other. Likewise in shopping centres, maintenance to damaged bollards caused by shopping trolleys can be virtually eliminated.
Skinz sleeves have three grooves designed into the bollard cover that allows reflective tape to lay flush against the sleeve, greatly reducing the chances of the tape peeling.
Wall Protector
Wall Protectors are made of highly impact resistant rubber to protect walls from cars, trolleys, forklifts and other vehicles from impact. This wall protector benefits from a high quality, incredibly durable reflective strip which makes for high visibility in low light environments. Very easy to install with pre-drilled mounting holes.
Disability Wheel Stop
Designed to comply with AS2890.1:2004 & coloured Blue specifically to highlight Disabled parking bays, the compliance wheel stop is manufactured from high-tech Linear Low Density Polyethylene. (LLDPE)
This one-piece wheel stop will not fade, rot or rust & comes complete with matching blanking plugs to conceal the fixings. Optional signage available to provide added visibility if required.
Downpipe Protectors
These bull dog Downpipe Protectors have been designed to guard cables and exposed pipes from the risk of damage caused by maneuvering forklifts and vehicle impacts. Pipe guards defend your vehicle or forklift as well as your downpipes, without intruding on available car parking space. Manufactured from mild steel, the guards are hot dipped galvanised & powder coated Yellow for high visibility & include 6 x pre-drilled mount holes 10mm diameter. Available to suit 100mm or 200mm pipes or cables.
Rumble Strip Rubber
Rubber Rumble Strips are designed for use as a speed moderator and lane divider in car parks and driveways. Manufactured from high-quality durable recycled rubber they are available in black and safety yellow. They are also ideal for use as a wall mounted bump protector in parking complexes, warehouses and factories to guard against impact damage.
Speed Hump Traffic Calming
Traffic calming speed hump system is designed with interlocking body and end modules that are made from solid natural and recycled rubber. It comes with fixings for immediate installation into asphalt or concrete surfaces.
Rubber Speed Hump
Rubber speed humps are made from black recycled and natural rubber. They comprise alternating black and yellow body modules with optional black rubber ends. Rubber speed humps are easy to install by one person, and can be removed when the traffic conditions change. Rubber models are the perfect low priced alternative to steel or concrete speed humps.
Foam-Filled Column Cushion
Column Cushion, also known as a Column Protector, helps prevent damage to structural columns by surrounding them with a foam-filled polyethylene cushion. Available in a range of standard sizes that fit most square or round columns, the two blow-moulded hard shells can be installed in seconds without the need for any tools, and removed at any time for cleaning or maintenance.
Unlike most moulded column protectors which simply contain air, Column Cushion is filled with injectable expanding foam. This foam dramatically increases impact protection and helps the Column Cushion return to shape after impact. So while other column protectors may look similar, ONLY Column Cushion by Barrier Group has the added advantage of foam fill.
Product Features:
- a foam-filled polyethylene cushion.
- Moulded from high impact polyethylene in bright Yellow with contrasting Black straps.
- Can be used singularly or stacked in pairs.
- U.V. stabilised for indoor or outdoor use.
- Surprisingly cost-effective and maintenance free.
- Extremely versatile and durable.
- Chemical resistant, non-conductive and waterproof.
Height Bar
Suspended height restriction bar with hanger assemblies and chains
Minimise the risk of damaging vehicles and property caused by oversize vehicles entering areas of restricted height by installing suspended Height Bars.
Height bars are available in a range of standard lengths from 2 metres all the way up to 6 metres. Each height bar is supplied with the necessary chain suspension kits and “LOW CLEARANCE” text, with your specified height in Black lettering on a White vinyl background.
Use height bars at locations where vehicles first enter an undercover area or encounter an overhead obstruction, where the clearance in either case is: (i) 3 metres or less if only cars or light vans are likely to use the facility or (ii) 4.6 metres or less in all other areas.
Galvanised Hoop Bollards Heavy Duty Steel
Hoop Bollards are intended to safeguard the perimeters of areas subjected to hazardous factory traffic as well as vehicle impacts. The Hoops are ideal for both external and internal spaces ensuring installations throughout a variety of areas throughout the premises.
Product Features:
- Rolled out of a single piece of heavy wall pipe
- Sold in 600 or 900mm wide models
- Three mounting options; fixed surface mount, fixed in-ground or even removable in-ground
- Hot dip galvanised
Truck Wheel Stop
Designed to withstand the weight of heavy vehicles and machinery when driving into parking bays. Manufactured from 5mm heavy wall steel tube and hot dip galvanised. Recommended for installation into concrete surfaces only. Fixings included.
Compliance Wheel Stop
Created to comply with AS/NZS 2890.1:2004 and produced from high tech Linear Low Density Polyethylene (LLDPE) with sustainability in mind, Compliance Wheel Stop is the clear green choice.
Compliance can be obtained in four standard U.V. stabilised colours - Yellow for increased pedestrian safety and visibility, Blue for highlighting handicapped parking areas, Grey for a concrete-like finish and an economical recycled Black.
Four fixing points allow for exceptional hold-down strength. All come supplied with blanking plugs.
Add a fixing kit to your order from our range of choices which give for a variety of installation demands.
Product Features:
- Environmentally friendly Linear Low Density Polyethylene (LLDPE) provides a solid U.V. stabilised colour
- Easy for one person to install weighing in at 5.5kg
- Fixing systems offered for installation onto concrete, bitumen or asphalt
- Blanking plugs included. Fixings sold separately