Tee-Lok Removable Bollards – Surface Mount
Surface mount removable bollards are ideal for installation where core drilling or slab penetration is not permitted. Tee-lok bollards are designed with an internal locking system that is activated by a T-handle key unique to this model.
Bike Rail – Style 1
Bike rails are manufactured from 48mm diameter mild steel pipe with a 3mm wall. They come in galvanised and powder coated Yellow or galvanised only models. Available in two sizes for surface mount and below ground models. Both models stand 800mm above ground, with 300mm extra for below ground installations.
Installation: Surface mount models have a 6mm thick, 150mm diameter surface mount flange that comes with eight 10 x 50mm masonry anchors. Below ground model has welded concrete starter bars.
Speed Hump Standard Duty Steel Slo-Motion
Steel speed humps designed for standard duty use in car parks, shopping centres and factory complexes. Ideal for car and forklift traffic.
Speed Hump Heavy Duty Steel Slo-Motion
Steel speed humps designed for heavy duty use in transport depots, factories and terminals. Ideal for truck and bus traffic
Parking Space Protectors
Collapsible parking space protectors are used in private and commercial car parks to stop unauthorised vehicles from occupying a parking spot or entering prohibited areas.
Wheel Chock – Moulded Plastic
Plastic wheel chock stops vehicles, trucks, trailers and caravans from moving when they are parked. Ideal for transport companies, mine sites and caravan owners, this wheel chock is suitable for fixing to a truck or trailer body to ensure the chock is always on hand when required. Truck mount purchased separately.
Wheel Chocks – Urethane
Wheel chocks manufactured from moulded urethane in bright orange colour are suitable for stopping vehicles, trucks, trailers and caravans from moving when not in use. Ideal for transport companies, mine sites and caravan owners.
Anti Collision Strips – Impact Protection
Speed Hump Traffic Calming Rubber Round
Traffic calming rubber hump is designed with a round profile as an alternative to traditional speed hump models. The smooth design allows for use from a wide range of light to heavy vehicles and is made from shock absorbent materials for quiet operation. Ideal for protecting pedestrians by control vehicle traffic speed and suitable for car parks, laneways and driveways.
Rubber Dock Bumpers (D-Section)
Rubber docking bumpers made from heavy duty, blended rubber compound and designed to protect assets from vehicle damage. The popular D-shaped design is ideal for mounting to loading docks, docking bays, jetties and directly onto trucks.
Wheel Chocks – Rubber
Rubber wheel chocks made from moulded recycled black rubber are available in single and double-sided designs. They are suitable for light and heavy duty vehicles such as cars, utes, caravans, buses and trucks. The portable and compact design makes storage in your vehicle easy and non-invasive.
Reflective Traffic Cones
Reflective traffic cones are manufactured from U.V. stabilised fluorescent orange flexible plastic materials and come with a plastic or rubber base. They are widely used for road works, schools, civil engineering and car parks and are ideal for a range of pedestrian safety and vehicle control uses.
One-Way Access Spikes
The Blade Runner one way access control consist of either a 1,000mm or 500mm heavy duty steel modules & steel end caps.
Each module has independently retracting teeth, when a vehicle approaches from the correct direction the teeth simply retract allowing the vehicle to pass freely, when approached from an unauthorised direction the teeth lock up denying access and risking almost certain tyre damage.
Key features of the one way access spikes include high visibility lime green powder coat finish and an ultra low profile construction to ensure adequate vehicle clearance. The one way access control system has been designed to provide a soft approach for vehicles due to its low ramp angle and reduced height. These same features also eliminate much of the noise commonly associated with older style products.
Six fixing points per metre (4 per 500mm module), heavy steel construction, steel end caps and revolutionary new spring design ensure a long service life with low maintenance.
WARNING: - Always check with your local authority or controlling body to ensure one way access spikes are allowable in your situation (this is the end users responsibility). One way access spikes MUST always be installed with an awareness sign kit. One way access spikes should always be placed clear of intersections and curved roadways. Failure to heed these warnings will void all warranties.
Speed Hump Slo-Motion Compliance
Slo-Motion Compliance Speed Hump is manufactured from Linear Low Density Polyethylene (LLDPE). Lightweight and strong design has the ability to take heavy duty traffic from vehicles, trucks and buses.
Pilot Hazard Lights
Like all of the other components in the Pilot system, the LED solar powered hazard light utilises our unique twist-lok quick connect system to attach to the full range of posts, cones, wall and magna-mount holders.
Pilot lights are available in Red, Green, White or Amber light. When fully charged after exposure to sunlight, the lights will continue to function for many hours without the need for batteries. A built-in 3 position switch allows the selection of OFF, FLASH or STATIC modes.
The reflective band at the top increases night visibility & indicates the colour of the LED's.
Pilot Hygiene
Our range of ready-made hygiene kits will help you promote good hygiene practices. More than ever before employees and customers are encouraging businesses to promote safe hygiene practices, and our range of kits make it easy to deploy sanitiser stations through your workplace, office or retail environment. With everything you need to help prevent the spread of germs, our kits make it easy to address these workplace and public concerns. Sanitiser/soap not included.
Pilot Signage
Pilot multi-post sign range, 1.4mm polypropylene, 300mm wide x 450mm high.
Pilot Post & Bases
The Pilot Retractable Belt Barrier (10M) is a unique, purpose-designed belt barrier system that you can confidently deploy into any traffic, construction or facilities management situation to control hazards where pedestrian safety may be at risk. This versatile cone top belt barrier is accompanied by a full range of supporting accessories which makes it adaptable to any internal and external environment in a wide range of industries, including construction, airports, events, retail, utilities, mining/resources and many more.
Pilot Telescopic Multi Post
Whatever you want it to be! The telescopic post is mounted to a mobile 20kg cast iron base that can extend 700mm from 1300mm to 2000mm or be locked anywhere between. Compatible with all Pilot accessories, Multi-Post can be configured in numerous ways using the included accessory mountings.
In outdoor or windy conditions the stability of Multi-Post can be increased through the addition of optional 10kg base weights Up to two base weights at 10kgs each can be added bringing the total weight of the Multi-Post base to 40kgs. The weights can be added or removed at anytime without the need for tools.
Co-Pilot Post & Base
Got a wind problem? Let the Co-Pilot take care of it. The biggest problem with long reach belt barriers used outside is wind. With its 20kg cast iron base and stainless steel post, Co-Pilot provides stability and mobility, while the 75mm non-marking polyurethane wheels and pozi-grip handle make positioning as simple as tilt and walk.
If necessary, stability can be increased even further through the addition of optional 10kg base weights, Up to two base weights at 10kgs each can be added bringing the total weight of the Co-pilot base up to 40kgs. Base weights can be added or removed at any time without the need for tools.