Industrial Gate
Galvanised Hoop Bollards Heavy Duty Steel
Hoop Bollards are intended to safeguard the perimeters of areas subjected to hazardous factory traffic as well as vehicle impacts. The Hoops are ideal for both external and internal spaces ensuring installations throughout a variety of areas throughout the premises.
Product Features:
- Rolled out of a single piece of heavy wall pipe
- Sold in 600 or 900mm wide models
- Three mounting options; fixed surface mount, fixed in-ground or even removable in-ground
- Hot dip galvanised
One-Way Access Spikes
The Blade Runner one way access control consist of either a 1,000mm or 500mm heavy duty steel modules & steel end caps.
Each module has independently retracting teeth, when a vehicle approaches from the correct direction the teeth simply retract allowing the vehicle to pass freely, when approached from an unauthorised direction the teeth lock up denying access and risking almost certain tyre damage.
Key features of the one way access spikes include high visibility lime green powder coat finish and an ultra low profile construction to ensure adequate vehicle clearance. The one way access control system has been designed to provide a soft approach for vehicles due to its low ramp angle and reduced height. These same features also eliminate much of the noise commonly associated with older style products.
Six fixing points per metre (4 per 500mm module), heavy steel construction, steel end caps and revolutionary new spring design ensure a long service life with low maintenance.
WARNING: - Always check with your local authority or controlling body to ensure one way access spikes are allowable in your situation (this is the end users responsibility). One way access spikes MUST always be installed with an awareness sign kit. One way access spikes should always be placed clear of intersections and curved roadways. Failure to heed these warnings will void all warranties.
Rubber Speed Cushion
Rubber Speed Cushions are made from recycled rubber. Rubber is lighter & easier to work with than asphalt & concrete, significantly reducing installation time.
Rubber pieces can pulled up & moved without being destroyed. This is convenient for municipalities who want to insttute temporary measures to test an area or permanently control traffic speed. Long lasting & cost-efficient, sold as a kit or individual sections if a section is damaged & needs replacing, supplied complete with fixings.
Truck Wheel Stop
Designed to withstand the weight of heavy vehicles and machinery when driving into parking bays. Manufactured from 5mm heavy wall steel tube and hot dip galvanised. Recommended for installation into concrete surfaces only. Fixings included.
Parking Space Protectors
Collapsible parking space protectors are used in private and commercial car parks to stop unauthorised vehicles from occupying a parking spot or entering prohibited areas.
Portable Crowd-Q Plastic Fence Barrier
Crowd-Q is a system of portable interlocking freestanding fence panels for crowd management. Crowd-Q is manufactured from super tough and light weight moulded polyethylene in high visibility orange. Maximum panel openings if 80mm endure small children are unable to climb through or under. Other features include stacking dimples, built-in reflective strips and low profile feet that rotate for transport or stacking. Panels link together to create continuous barricading for festivals, parades, sporting events and work sites.
Stainless Steel Convex Mirrors
Stainless steel safety mirrors are extremely durable over long term installations and are designed for outdoor use in areas that are known for vandalism or high weather conditions such as airports, railway stations, prisons and public places. Post mount brackets and fixings are supplied for easy installation to walls or posts.
Foam-Filled Column Cushion
Column Cushion, also known as a Column Protector, helps prevent damage to structural columns by surrounding them with a foam-filled polyethylene cushion. Available in a range of standard sizes that fit most square or round columns, the two blow-moulded hard shells can be installed in seconds without the need for any tools, and removed at any time for cleaning or maintenance.
Unlike most moulded column protectors which simply contain air, Column Cushion is filled with injectable expanding foam. This foam dramatically increases impact protection and helps the Column Cushion return to shape after impact. So while other column protectors may look similar, ONLY Column Cushion by Barrier Group has the added advantage of foam fill.
Product Features:
- a foam-filled polyethylene cushion.
- Moulded from high impact polyethylene in bright Yellow with contrasting Black straps.
- Can be used singularly or stacked in pairs.
- U.V. stabilised for indoor or outdoor use.
- Surprisingly cost-effective and maintenance free.
- Extremely versatile and durable.
- Chemical resistant, non-conductive and waterproof.
Heavy Duty Bump Rail
Bump rail is high strength aluminium extrusion that weighs less than half the equivalent steel profile per lineal metre.
When faced with the curved side to an impact Bump Rail is designed for use as a truck or machinery stop, the rounded top & curved face offering a higher contact point for the vehicle wheels.
At 2,400mm long it is the right width for most trucks, fixing points at either end have been strategically positioned at the point of impact 275mm apart to ensure maximum hold down. Also available is a galvanised steel slip joiner for joining rails together if required.
Supplied pre-drilled & powder coated Yellow.